Quick Detail
Place of Origin
HS-CODE
85-
Package & Delivery Lead Time
Detailed Description
Parameter:
build in MPPT charge controller
Rotor Diameter: 46.1 in(1.17m)
Weight : 7.5KG
Shipping Dimensions : 24*15.7*7.5 in(600*400*20mm)
Mount : 1.5 in schedule 40 pipe 1.9 in (48.26mm)OD
Start-up wind speed : 2.8m/s
Output voltage : 12V/24V auto. distinguish
Rated power : 400W at 29mph(13m/s)
Max power: 550w
Turbine Controller : MPPT(Maximum Power Point Tracking) controller
Body : cast aluminum
Blades : 3-Carbon fiber composite
Overspeed Protection : Electronic torque control
Kilowatt Hours per Month : 40Kwh/mo at 12mph(5.5m/s)
Survival wind Speed : 112mph(50m/s)
Max Noise level (decibel) : 60db
Warranty : 3 year limited warranty
Details:
1,Blade
It is a real Carbon fiber material ,By Injection mould. Not a normal plastic .
They are very hard but light ,Easy to start up .it is a ral top-grade
blade.the blade warranty for this blade is 6 years
2.body
A whole Die casting aluminum ,Not screw by some nut like our competitor .
There is LED lighting on the body ,Show the working state .
The surface is power High temperature plastic spraying under 400 Celsius degree,It will suitable for marine and all other severe environment .
There is unique identity serial number for our after-sell service .
the body warranty is 15 Years
3,Nose
the wind turbine nose is also made of Carbon fiber with some plastic combine,There is three SUS304 M4x10 hexagonal screw ,It will never broken and blow off the hub
4,Generator
the wind turbine generator is made of SUS304 material .It will not rust .The magnets is Rare earth permanent magnet ,
wind generator warranty is 3 years
5,Controller
The wind turbine have a MPPT controller buit-in the body .
It is a full Intelligent controller,Voltage rise,auto brake,auto
unloading,12/24V auto distinguish,auto week up and so on ,It will protect
the generator and will have a good charge current even in a small wind
Have this controller ,You just connect it directly to your battery
0 likes
Click enlarge Image
