Dot Matrix Graphic LCD Module

Quick Detail

Package & Delivery Lead Time

Detailed Description

Dot matrix graphic LCD moduleADM12864G is small dot matrix graphic LCD module with KS0108B controller , 5V,parallel interface, STN/FSTN LCD, LED backlight and wide viewing angle.Description of Dot matrix graphic LCD module ADM12864GDot matrix graphic LCD moduleADM12864G can display 128*64 dots size LCD panel using a 128*64 bit-mapped Display Data RAM (DDRAM). It interfaces with an 8-bit microprocessor. It can be used in embedded systems,industrial device,security,medical and hand-held equipment.1.Features •Display format: 128*64 dots matrix graphic •Easy interface with 8-bit MPU •Low power consumption •LED back-light •Driving method: 1/64 duty, 1/6.7 bias •LCD driver IC: KS0108B、KS0107B • Connector: Zebra2.Mechanical Specifications ItemDimensionUnitViewing Area (W*H)62.0*44.0mmNumber of Dots128.0*64.0PCSDot Size (W*H)0.40*0.56mmDot Pitch (W*H)0.44*0.60mmModule Size With B/L93.0*70.0*15.0mm3. Absolute Maximum Ratings ItemSymbolMinMaxUnitPower   VoltageVDD -VSS05.5VInput VoltageVIVSSVDDOperating Temperature RangeVOP0+50℃Storage Temperature RangeTST-10+604.Mechanical diagram 5.Description Of Terminals Pin No.Pin NameInput/OutputFunction1VSS—VSS: GND2VDD—VDD: +5V3V0—Adjustable resistor terminal With VEE pin to adjust LCD contrast.4RSInputRegister selection RS Description H The data in DB [7:0] is display data. L The data in DB [7:0] is control data5R/WInputRead or Write RW Description H Data appears at DB[7:0] and can be read by the CPU L Display data DB[7:0] can be written at falling edge of E6EInputEnable signal E Description H Read data in DB[7:0] appears while E= "High". L Display data DB[7:0] is latched at falling edge of E.7~14DB0~7I/oData bus [0~7] Bi-directional data bus15CS1InputChip selection When CS1=H, CS2=L, select IC116RSTInputReset signal. When RSTB=L1.ON/OFF register becomes set by 0.(display off)2.Display start line register becomes set by 0 (Z-address 0 set, display from line 0)After releasing reset, this condition can be changed only by Instruction.17VEENC18CS2InputChip selection When CS1=L, CS2=H, select IC219~20NC——FAQ for transflective LCD module 1:What is transflective LCD module ? Answer:The transflective polarizer is a mixture of reflective and transmissive. It provides the ability to read the LCD with or without the backlight on. It will work for all lighting conditions from dark with backlight to direct sunlight which makes it the most common choice.2:What areyour main products?Answer: Our main products are COB module, COG module, TFT module, LCD panel, LED and Touch panel.3:Where is you company located ? Answer: Our company is located in Xiamen, the southeast of China. 4: What can 128x64 dots display? Answer: 128 dots wide & 64 dots high display is an industry standard that can display images or any size letter or number necessary. url:http://www.amotec-lcd.com

Basic Company Information

Xiamen Amotec Display Co., Ltd

Company Advantage

Detail Company Introduction