E26 Lamp cap gauge | go gauges for caps E26-7006-27D-3

Quick Detail

Package & Delivery Lead Time

Detailed Description

E26 Lamp cap gauge | go gauges for caps E26-7006-27D-3 GO GAUGE FOR CAPSCALIBRE ENTRE POUR CULOTSE26, E26/50x39, E26/51x39 & E26d Dimensions in millimetres - Dimensions en millimtres The drawing is intended only to illustrate the essential dimensions of the gauge. Le dessin a pour seul but dillustrer les dimensions essentielles du calibre. For details of caps E26, E26/50x39, E26/51x39 and E26d, see sheets 7004-21A, 7004-130 and 7004-29 respectively. Pour les dtails des culots E26, E26/50x39, E26/51x39 et E26d, voir feuilles 7004-21A, 7004-130 et 7004-29 respectivement. (1) Detail of thread. Right-hand thread. (2) The sharp part of the edge of the thread at the entrance of the gauge shall be broken with a radius of 0,2 mm to 0,3 mm. (1) Dtail du filetage. Filet droite. (2) Le bord vif de la partie filete l'entre du calibre doit tre arrondi avec un rayon de 0,2 mm 0,3 mm. PURPOSE: To check the maximum dimensions of the screwthread and dimension T1min of E26, E26/50x39, E26/51x39 or E26d caps on finished lamps. TESTING: When the cap on a finished lamp has beenscrewed into the gauge as far as it will go, the central contactshall touch surface X. When the lamp is removed from thegauge, at least two full turns shall be required to disengagethe threads. BUT: Vrification des dimensions maximales du filetage et dela dimension T1min des culots E26, E26/50x39, E26/51x39ou E26d sur lampes termines. ESSAI: Lorsque le culot sur lampe termine est visscompltement dans le calibre, le contact central doit toucherla surface X. Lors de l'enlvement de la lampe du calibre, aumoins deux tours complets doivent tre accomplis pourdsengager les filetages. Related gauges: - - - - "NOT GO" GAUGE FOR E26, E26/50x39, E26/51x39 & E26d CAPS ON FINISHED LAMPS (Sh. 7006-29L-4) | "GO" GAUGE FOR CAPS E26, E26/50x39, E26/51x39 & E26d (7006-27D-3) | GAUGE FOR TESTING CONTACT-MAKING OF LAMPS FITTED WITH CAPS E26, E26/50x39,E26/51x39 & E26d (NON-SKIRTED) (7006-29-3) | E26d GAUGE FOR CAPS ON FINISHED LAMPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT (7006-29A-2) | E26d GAUGE WITH REFERENCE DIAMETER OF 23 mm FOR CAPS (7006-29B-2) | E26d GAUGE WITH REFERENCE DIAMETER OF 13,2 mm FOR CAPS (7006-29C-2) | E26d GAUGE WITH REFERENCE DIAMETER OF 10,4 mm FOR CAPS ON FINISHED LAMPS (7006-29D-1) | - - - -

Basic Company Information

KingPo Technology Development Limited

Company Advantage

Detail Company Introduction