Liquid Thermal Shock Test Chamber,Cold and hot impact machine can be used to test material structure or composite material, in an instant by extremely high temperature and extremely low temperature continuous environment can endure degree, in order to in the shortest time test commits any heat bilges cold shrink caused by the chemical changes or physical damage. Applicable objects including metal, plastic, rubber, electronics, pv, solar... And other materials, the products can be used as a basis of improving or reference.

Significant reductions in fluid usage make liquid thermal shock affordable

Purchasing a liquid thermal shock chamber needs close consideration of the long term operating costs. The specialized liquids used can easily evaporate, causing the loss of thousands of dollars of fluid per year, if not properly contained. Liquid-to-liquid thermal shock testing is typically conducted to apply very strong, repetitive thermal stress to test pieces. It can model a product's ability to withstand thermally-induced size changes, crack resistance, hermetic integrity, and changes in electrical properties. This form of testing provides a very rapid temperature shock recovery of conditions, and it can significantly reduce testing time by requiring shorter soaks and less cycles. The liquid thermal shock chambers have been built to meet the demanding test requirements, which has become a defacto industrial standard for semiconductor devices.

Applications:

1 Test physical changes of IC, PCB, ceramic semiconductors and other high polymer materials. 2 High and low temperature liquid tanks use forced mixing convection way. 3 Automatically move testing samples from up to down or left to right to preheating, precooling. 4 Use Garden D02TS in hot and cold chambers to reduce the cost. 5 Suitable for water cooling and air cooling.

Features

Multiple mechanisms for reduction of fluid losses

Automatic shutters at bath inlets

Condensation pipe at the top rim of the high-temp bath

Vapor recycling unit in the transfer area

Designed for single (Galden) & dual-fluid (Fluorinert) use

Easily located, requires only electric power hook-up

Low noise of only 65 dBa

Touch-screen controller

Technical parameters:

Model No			GLTS-021-65-LW	GLTS-041-65-LW
Testing method			Two-liquid bath system with specimen basket transfer
Test zone size WHD(mm)			200350300*2Bath	260350450*2Bath
Test zone size WHD(mm)			114017851240mm		120017851320mm
Performance	Hot bath	Preheat temperature range	+80℃～+200℃
		Temperature fluctuation	±2℃
		Temp.heat-up rate	Ambient temp.to+150℃ within 90min
		Temp.pull-down rate	+150℃ to +60℃ within 60min
	Cold bath	Precool temperature range	-60℃～0
		Temperature fluctuation	±2℃
		Temp.heat-up rate	-65℃ to 0 within 60min
		Temp.pull-down rate	Ambient temp.to -65℃ within 120min
System	Circulation system		Sirocco fan
	Heating system		SUS#304 stainless steel high-speed heater
	Cooling system		Imported compressor,Tecumseh compressor(or Bizer Compressor),finned type evaporator,air(Water)-cooling condenser
	Controller		TEMI990，8226，8227，8229
Thermal shock range			-65.00℃～00.00℃/+600.00℃～150.00℃
Testing time			5min	5min
Transfer time			Approximately 10 seconds
Temp.resolution			0.1℃ / 1 min
Specimen Basket size(mm)			100180200mm	160180350mm
Specimen basket load capacity			1C 2Kg	1C 5kg
Controller			Color TFT LCD panel(6.5inch)
Power supply			AC 1Ψ 220V；3Ψ 380V 60/50Hz

Selling Leads Detail

Company Info

Basic Company Information

Grande Electronics Technology Limited

TEL : 86-769-87003076 / FAX : 86-769-87008505
Hengling Industrial Park,NanShe Village,ChaShan Town,Dongguan,Guangdong,China Guangdong Dongguan China [CN]
Homepage : http://www.grandetop.com/

Main Products

Temperature Humidity , Thermal Shock Test C , Precision Hot Air Ov , Aging Test Chamber ,

Company Advantage

Grande Electronics Technology Limited is professional R&D,manufacture,sales service,maintenance,after-sales service, manufacturer of environmental test chamber. We established our own factory in 2012 , which has become an important manufacturer of environmentally friendly test chambers.
To help our customers improving the testing requirements,Grande has established strategic cooperative partnership with first-class Universities, whose Cryogenics and Test Centers possess the world's leading and domestic first-class inspection techniques, cryogenics inspection equipment and instruments.
As an enterprise responsible for society, environment and safety, the company has initially built ISO9001:2000 Quality Management System, ISO14001:2004 Environmental Management System and GB/T28001-2001 Occupation; Health Safety Management System in their industries. Besides, it adheres to the operation principle of "The best quality environmental test chamber manufacturer in China.Quality is not just a word".

Detail Company Introduction