EN10028-5 P355ML2 P355ML2 STEEL PLATE
Relative Grades in specification EN10028_5 as follows:
P355M, P355ML1, P355ML2, P420M, P420ML1, P420ML2,
P460M, P460ML1, P460ML2
EN10028-5 standard specification for weldable fine grain steels, thermomechanically rolled.
EN10028-5 covers the steel grades given in three qualities:
a) The basic series (P...M)
b) Series with low temperature properties down to -40 °C (P...ML1);
c) Series with low temperature properties down to -50 °C (P...ML2).
Supplementary Technology: HIC Test | NACE MR0175 | Z15 | Z25 | Z35
Thickness: 6MM to 300MM,
Width: 1500mm to 4050mm,
Length: 3000mm to 15000mm
Designation of P355ML2, P means steel plates of this grade shall be mainly used for pressure vessels building; 355 is its minimum yield strength point; M stands for the rolling delivery condition shall be thermomechanically rolled;
L2 means this steel grade shall be done impacting test at minus 50 centidegree with minimum impact energy 27 J.
Te.l: 8.6-3715.5031185
Fa.x: 8.6-3718.6220366
Mobile:+86-18039665982
m.ai.l: sales006 at firsteelplate dot com