Quick Detail
Place of Origin
HS-CODE
95-
Package & Delivery Lead Time
Detailed Description
Specification
-Output : Continues 3 0 A, Burst 40 A up to 10 Secs.
-Input Voltage : 5.6V --- 16.8V ( L ithium : 2 – 4s or NiMH/NiCd 5 -12 Cells)
-BEC (Battery Elimination Circuit) Output ： linear mode BEC 2A
-Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)
-Size ： 24mm*45mm*11mm (width*length*height)
-Weight : 2 5g
-Packaging include:
-sets of gold plated motor connectors and heat-shrink tubings (Remark: motor connectors and heat-shrink tubings need to be purchased additionally)
Features
-Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.
-Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.
Programmable Items :
-Brake Settings ： brake enabled / brake disabled, default is brake disabled
-Battery Type ： Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd) ， default is Li-xx.
-Low Voltage Protection Mode(Cutoff Mode) ： power reducing / power cutoff, default is power reducing.
-Low Voltage Protection Threshold(Cutoff Threshold) ： low / medium / high, default is medium cutoff voltage.
-For Li-xx battery ， number of battery
cells are judged automatically ， low / medium / high cutoff voltage for each cell are: 2.6V/2.85V/3.1V. For example: Cells Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.85*3=8.55V.
-For Ni-xx battery, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (0% means the low voltage cutoff protection function is disabled) . For example: a 10 cells NiMH battery pack, fully charged voltage is 1.44*10=14.4V, when medium cutoff voltage is set, the cutoff voltage is : 14.4*45%=6.5V.
-Startup mode: normal / soft / super-soft, default is normal startup.
-Timing: low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used.
-Full P rotection F eatures: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection .
Advantages
-Military Standard Capacitor with extremely low resistance used on voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.
-Extreme low resistance, super current endurance.
-Microprocessor and BEC use separate voltage regulator IC, with good anti-jamming capability.
0 likes
Click enlarge Image
