1. Range
1.1 This standard specifies the entire process of
mineral processing plant design practice and control responsibilities and requirements.
1.2 This standard applies to the Company's mineral processing technology management.
2. References
2.1 " China Nonferrous Metals Business Management Book"
2.2 "Technical Specification for the Production of non-ferrous metal mines "
3. Definitions
Mineral processing technology management is required by the Company’s physicochemical problems of mineral processing involved in the production process, the organization of principles of mineral processing and related professional and technical management.
4 Responsibilities
4.1 Deputy general manager in charge of technical management of organizational beneficiation technology .
4.2 Metal Working Committee is responsible for balancing the metal balance management.
4.3 Quality Inspection Department is responsible for technical indicators beneficiation testing, production technology oversight and preparation of metal balance report table.
4.4 Technical Management Department is responsible for organizing major process changes coordination.
4.5 Mineral processing plant responsible for the implementation and daily management of the production of technical indicators.
5. 1 Principles of mineral processing
5.1.1 Beneficiation technology personnel should be actively pursued in the production properties of ore , master processed ore sorting features , and master the different mineralization of ore minerals , ore grade and optional changes.
5.1.2 Concentrator technical staff should be organized under investigation bowl changes in different stages of mining deposits, ore zone, in conjunction with the production technology department to examine the nature of the ore and sampling experiment studies should be completed before dressing production.
5.1.3 Bowl under production units should be strictly according to plan the organization of the mine, the ore grade and ore remain optional relatively stable.
5.1.4 In the production process should strengthen scientific experiments,
mineral separation process of continuous improvement and weaknesses, and solve the key problems in production and for the production of technical reserves.
5.1.5 Adhere to energy consumption in the production process, saving electricity, improve the power factor, and leverage backwater.
5.1.6 Concentrator must strictly implement the mine management system developed to achieve safe production and civilized production.
5.2 Mineral processing plant design practice and control: crushing and grinding
5.2.1 Mill crushing and screening process must ensure that the procedure under normal unloading ore and balanced continuous production processes.
5.2. 2 Lower crushing final product size, adhere to the basic principles of little more crushing mill. Each segment of the crusher product size broken , and broken port of discharge width ratio should follow the rules and require periodic inspection and adjustment , and fill operation records, control the final particle size .
5.2.3 Strictly controlled crushing and screening process parameters, improve screening efficiency, and ensure a balanced production capacity of process. More than the standard 2.4 chunks of ore allowed to enter the next process, mixed with pieces of iron ore and other debris should be excluded as soon as possible to ensure the safety of crushing equipment.
5.3 grinding and classification mineral processing technology
5.3.1 Strictly controlled grinding process parameters , the amount of ore milled , feed size , return the amount of sand and other technical conditions must follow the rules and requirements of timely inspection , adjustment, timing detection and fill records.
5.3.2 Milling ball into the volume, proportion, filling rate , and the additional amount of additional technical requirements should be proportional and fill operation records . Ball mill should be cleaned regularly, wear a packet to find out the law , to make corresponding technical summary.
5.3.3 Beneficiation technology should continue to explore, research and promotion of new wear-resistant, corrosion-resistant materials to extend the use of time device
5.3.4 Grinding process parameters, grinding concentration of 75% ; grading overflow concentration 38-43 % ; fineness of 67 to 72% -200 mesh ; by freshmen - 200 mesh count mill production capacity 1.3t/M3.H; return sand than 300%.
5.3.5 The operator should be careful operation, ground inspection, adjustment to improve the handling capacity of the station, reduce energy consumption , eliminate milling inverted and run rough idling phenomenon.
5.4
Flotation separation processing technology
5.4.1 The implementation of sub- dosing, rational drug experimentally determined by beneficiation process requirements.
5.4.2 flotation operation should be done ground observation, ground adjustment and , strictly , " a quasi- three degrees " ( three degrees : Mine rack density , grinding fineness , pulp acidity reduction , one accurate : the administration to ACCURATE ) .
5.4.3 Add a point for each drug and dosage instructions should add technology to adjust. After on-site management and technical personnel to consent shall not be arbitrarily changed.
5.4.4 into factory agents to conduct inspection, modification and drug does not meet the quality standards shall warehousing use. Various concentrations of pharmaceutical formulation and operational procedures must be strictly in accordance with the requirements of the process carried out.
5.4.5 strictly enforce the rules and careful operation, and continuously improve product quality and mineral recovery. Maximize the recovery of valuable metals, reduce metal loss. Operations shall not run freely tail and so put slot. Special circumstances need to put slot length and above shall be subject to duty and agreed to make records.
5.4.6 Beneficiation process should remain relatively stable, for the test should be changed or feasibility study report.
5.4.7 Change the number to change jobs, change of major equipment, the larger structural changes to work flow and process locally by the deputy general manager of the responsible person in charge of dressing approval, the competent authorities grant preparation
5.4.8 Local process of structural adjustment and non-essential equipment, technology management report approved by the Ministry for the record. Improved local loop plant supervisor for approval by the engineer.
5 4.9 outsourcing team has no right to change the process. Temporary changes are accidental and should be promptly reported to the leadership or executive deputy general manager of the concentrator, to restore the original process immediately after the accident eliminated.
5 4.10 Transformation process is complete, test production after a period of time ( three to six months ) should propose technical summary report.
5.4.11 A biennial plant wash away the whole expedition, which grinding, classification, flotation, dewatering at least once a year and make inspection report . Check local process depending on production needs to be determined.
5 .4.12 million entries must be made transformation project proposal and feasibility study report, the technology projects included in the plan , plant ( the company ) to actively organize the construction , after completion of the project , commissioning and acceptance by the mining organization , design, construction units built drawings shall be responsible to settle modify items hundred brochures, covert project records, and organize the archive . Renovation project put into operation a year after a hundred entries should summarize and evaluate the technical and economic .
5.4.13 Million experimental research project implementation should be checked regularly, after the test is completed, the preparation of the final report experimental results validated after production, and achieved good results who should be a certain level of organizational identification.Research and Experimental Research optional nature of ore.
5.4.14 beneficiation test centers should be carried out. References and the promotion of new technology, new equipment, new materials and new pharmaceuticals, to promote and guide the on-site production services.
5 4.15 Consolidate, improve and enhance beneficiation automation and control .
5.5 Dehydration and concentrates, tailings management physicochemical problems of mineral processing
5 5.1 strictly follow the rules and technical conditions required to control the concentration of the thickener underflow , overflow water containing solids , and the filtrate water turbidity , filter vacuum degree of process parameters and product water , always check carefully recorded .
5.5. 2 closely monitor and prevent muddy run thickener, such as the enrichment process found skid pressure rake accident should take timely measures to rescue and fill out an accident report to analyze the reasons.
0 likes
Click enlarge Image
