Quick Detail
Place of Origin
HS-CODE
85-
Package & Delivery Lead Time
Detailed Description
Feature:
Main functions:
1. OBDIIinterface, supports plug and play, simple installation and avoid broken line.
2. Four display mode choices according to your preference.
3. Imperial/metric unit to select for different regions use
4. Speed, rotate speed, clock and fuel consumption are shown on the same screen. A glance can get all the driving information.
5. The scroll buttons, easy to use.
6. Intelligent warning system which includes audio and light warnings, available for users to configure.
7. Shift reminding function, suitable for the new driver.
8. Automatic adjustment of luminance according to different situation.
9. Display of throttle angle, which enables you to know the throttle angle at any time.
10. Start operation automatically after ignition, shut down automatically after powering off.
11. Soft CAT6.0 flat ribbon cable makes the wiring simpler and more beautiful.
12. High precision digital clock display.
13. Alarm at fatigue driving, overspeed, high temperature and low battery voltage.
14. Display of travel time, mileage and average speed (display after powering off)
15. Tire pressure monitoring function (optional). Alarm on high pressure, low pressure, fast leakage, low sensor battery.
16. Intelligent power management, with no worry of battery running out from long time parking.
Introduction of alarm function
1. Overspeed alarm
Overspeed will make the buzzer produce a continuous warning of "di-di" with flashing "km/h".
The buzzing stops after 5 seconds (the parameter can be set) and the flashing "km/h" remains.
2. Shift reminder
When the rotate speed exceeds 2300RPM (the parameter can be set), the buzzer produces a warning of "di-di" with flashing rotate speed graphic display area.
The shift reminder stops when the driving speed exceeds km/h (the parameter can be set).
3. Fatigue driving alarm
After driving for 4 hours (the parameter can be set) with one single ignition, the fatigue driving indicator light flashes to remind the driver to have a rest and the reminder will flash every 30 minutes.
4. Fault code reminder
When the vehicle has a fault code, the vehicle flashes its body light for 10 seconds to remind the driver of the fault code.
5. Abnormal tire pressure alarm
When the tire is in abnormal state, such as too low or too high tire pressure, fast leakage, tire sensor' RF signal loss and too high tire temperature,
HUD system will automatically shift to tire pressure mode, with abnormal tire pressure warning light flashing and the buzzer alarming "di-di" at the same time.
6. Low battery alarm of tire sensor
When the tire sensor's battery is low, the warning light for low battery will flash and the buzzer alarms "di-di" at the same time.
Technical specifications:
1. Dimensions: Length: 105 mm Width: 62 mm Heigh: 15 mm
2. Operating voltage: 1.9_16V
3. Sleeping working current: 1.10 mA
4. Normal working current: 1.90_400 mA
5. Working temperature: -40---85C
6. Weight: 120g
Prpareation before installation and using
1. Know your brands, you need to meet the OBD II standard models, ( Figure 1)
2. Identify the vehicle diagnostic socket (Figure 2), due to the different models are different outlet locations, and some rather narrow place, you can buy patch cords. Manufacturers and agents can contact the specific point of purchase.
Packing:
Packing list
1. HUD Main Body X1
2. Reflective Film X1
3. OBD Cable X1
4. Instruction Manual X1
5. Non-Slip Mat X1
6. Tire Pressure Sensor (optional) X4 7. Warranty Card X1
0 likes
Click enlarge Image
