Quick Detail
Place of Origin
HS-CODE
32-
Package & Delivery Lead Time
Detailed Description
FORMALDEHYDE-FREE
With broad compatibility in most plastics,JC-100 fluorescent pigment exhibits many advanced properties: brilliant clean fluoresce, superior tinting strength, melt-in type, easy mixing over the range of 135 to 230℃, low plateout, no formaldehyde emission, good low-temperature (150 to 180℃) dispersion, etc. JC-100 series is thus recommended for processes such as extrusion, injection molding and blow molding. in manufacturing of toys, safety equipment, graphic sheeting, display packaging, vacuum-formed products, banners, and many other eye-catching substance.
Available Color Selection
Chartreuse
JC1010
Red
JC1015
Green
JC1011
Cerise
JC1016
Orange-Yellow
JC1012
Pink
JC1017
Orange
JC1013
Magenta
JC1018
Orange-Red
JC1014
Blue
JC1019
Key Specifications of the Pigment:
Bulk density Density Softening point Processing Temperature Heat Stability Average Particle Size
0.72g/cm3 1.22 g/cm3 72 - 78℃ 135~230℃ 240℃ <100 mm
Processing Advantages
Formaldehyde-free. Environme tal-friendly.
Melt-in type with low softening point
Broad processing temperature range between 135 - 230℃
Greatly reduced plateout in processing equipment, resulting in less downtime.
A neutral additive; dose not add or detract from the lubricity of the plastic for processing
excellent heat resistance,
Caution: Some color shift may occur under severe heat conditions. The addition of one part antioxidant per hundred parts of plastic to be processed is recommended to minimize color shift.
Application in Plastics
Suggested Colorant Level
For transparent plastics, the fluorescent pigment level needed to develop fluorescent brilliance versus the thickness of the plastic part are recommended below:
Thickness (mm) 0.1 - 0.25 0.25 - 0.75 0.75 - 1.5
> 1.5
% Pigment by Wt 5.0 - 10 3.0 - 7.0 2.0 - 3.0 1 - 2.0
For opaque plastics, fluorescent pigment produces only surface fluorescence, regardless of the concentration of pigment used.
Colorfastness
The degree of colorfastness of JC-100 pigments depends on the type of plastic, concentration of colorant, film thickness, type and direction of exposure.
The incorporation of less than 1.0% ultraviolet screen of benaophenone or benzotriazole types may result in up to 30% improvement in colorfastness. Clear acrylic coatings containing 2 to 4% of UV screens are also usually effective in enhancing colorfastness. However, one should be careful in selecting a compatible UV screen for the particular plastic systems.
Storage
Under conditions that are cool, dry, covered, away from direct sunlight and free of airborne contaminates, the shelf life of the JC-100 pigments will be indefinite. Upon extended exposure to heat and humidity, JC-100 pigments may form lumps that need to be pulverized before use.
Toxicity
JC-100 fluorescent pigments are essentially non-toxic with zero formaldehyde emission and extremely low heavy-metal content, safe to be applied in end products such as toys. Material safety data sheet or MSDS is available upon request.
Disclaimer: The information hereon has been compiled from sources which we believe to be reliable, but we assume no responsibility or liability for its accuracy or for the result of any application made of any information contained herein, nor do we assume any liability for infringement of any patent which may result from the application of such information.
Click enlarge Image
