Brushing RTV-2 mold silicone rubber

Quick Detail

Package & Delivery Lead Time

Detailed Description

1.Application of Brushing RTV-2 molding silicone rubber : Brushing RTV-2 molding silicone rubber mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation. 2. Features of Brushing RTV-2 molding silicone rubber : Brushing RTV-2 molding silicone rubber, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration. 3. Operation instruction of Brushing RTV-2 molding silicone rubber : Brushing RTV-2 molding silicone rubber is composed of two components.Component A is white flowing liquid while component B is the curing agent. Steps: a.take silicone rubber of 100g and add 2% curing agent for mixing evenly. b. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. c.After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame . Note: brushing RTV-2 molding silicone rubber is used for pouring or brushing technique. That is to say, firstly fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon , thirdly mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, at last brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried. FAQ of Brushing RTV-2 silicone rubber for mold making 1.Why is the appearance of the finished mold striate and unsmooth? t is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the Brushing RTV-2 silicone rubber mold spray evenly on the product. In this case, the problem can be avoided. Any questions , please feel free to contact Aaron: TEL: 086-755-89948006 FAX: 086-755-89948030 MOBILE:086-18938867535 Website: www(dot)szrl(dot)net E-MAIL: xu2478276(at)msn(dot)cn Skype : aaronxu9

Basic Company Information

SHENZHEN HONG YE JIE TECHONOLOGY CO.,LTD

Company Advantage

Detail Company Introduction