Pad printing silicone

Quick Detail

Package & Delivery Lead Time

Detailed Description

A.Applications of Pad printing silicone rubbe Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface. B.Pad Printing Silicone Rubber Features: a. resistance to deformation, high-temperature b. high printing times c. good aging resistance d. exceptional elasticity e. great printing effect C.Pad Printing Silicone Rubber Operation Instructions: Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.g. we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. A fter 2-4 hours, you will get a Pad printing silicone rubber. D. FAQ of pad printing silicone rubber 1. Why the silicon pad is non-durable？ ① This problem is caused not by the liquid silicon rubber itself, but in the process of filtering, the filtering handled not properly and impurities are not all filtered out; or in the process of packing as containers not cleaned thoroughly. ② As the silicon oil will break the molecular chain of the silicon rubber. More silicon oil added, softer the pad printing will be, meanwhile nondurable and easy ageing it will also turn to be. ③ Some customers do not know well about the performance of silicon rubber. Actually, the durability of printing pad is closely related to the size of printing pattern. Some factories do not want to take the trouble to change the printing pad. While in fact, for large pattern, large silicone pads should be used, otherwise, use small one.(Generally, the ratio of the silicone pad to printing pattern is 3:1) 2. Why the printed pattern is incomplete or not clear? ① If the silicon pad is too hard while the pattern is very delicate or small, the printing patterns will be incomplete or not very clear, for in that way the silicon pad could not adsorb the printing ink from the steel plate well. If your pattern is very delicate or small, please use soft silicon pad for pad printing. ② If the percentage of water in the ink is very high, the printing pattern also will be incomplete, and spot may appeared. For this situation, please clean your ink box, or change the printing ink or Tianna water. E.Any questions of mold making silicone rubber, please feel free to contact Taylor : TEL:086-755-89948019 FAX:086-755-89948030 MOBILE:086-13430593056 Website:http://www.szrl.net E-mail:szrl.taylor@gmail.com

Basic Company Information

SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD.

Company Advantage

Detail Company Introduction