Haltech I/O Expander 12 Inc 2.5m Flying Lead Harness

Quick Detail

Package & Delivery Lead Time

Detailed Description

-4 x AVI – Analogue Voltage Inputs (0-5V)*1 -4 x DPI – Digital Pulsed Inputs ( 0-5V – Max Freq 300Hz) *1 -4 x DPO – Digital Pulsed Outputs (5V / 12V Pull ups – Max 1A) *1 -Broadcast rate of 20mS to the Haltech ECU for each channel. -User definable “Safe State” for each output in case of loss of communications or error. -Switchable pull up resistors on AVI channels for use with temperature sensors. -Power and Status LED’s -Powered by CAN bus. External power only required if DPO’s are to be used. -Multiple I/O Expander Boxes can be used on certain Haltech ECU’s ECU Suitability: -Sprint 500 – (maximum 1 box*3) -Sprint RE – (maximum 1 box*3) -Sport 1000/2000 – (maximum 1 box*3) -Sport GM – (maximum 1 box*3) -Pro Harness*4 – (maximum 1 box*3) -Pro Plug-in ECU’s*4 – (maximum 2 boxes*2) Power Requirements: Source: 8.6 to 16.5 Volts DC Consumption: 50mA @ 12Volts DC Physical Dimensions: -Length: 98mm -Width: 64mm -Height: 28mm Weight: -ECU: 125g (0.28 lb) -Harness: 630g (1.39 lb) Haltech I/O Expander 12Kit Includes: -Haltech I/O Expander 12 CAN direct connection cable (600mm)*2 -Haltech 2.5 Meter Flying Lead Harness. -1. Functions available may vary depending on ECU used. Full function listing on pages 2-4 of the Specification Sheet. -2. Optional CAN Hub required to be purchased if more than one device is to be fitted to the Haltech CAN Bus. Haltech Part # HT059990. -3. Supports Box A Only. -4. Supported in 1.10 and above firmware only.

Basic Company Information

CV POSMA ROHAM

Company Advantage

Detail Company Introduction