Quick Detail
Place of Origin
HS-CODE
S07-
Package & Delivery Lead Time
Detailed Description
DE Series firing system worked by 110V AC or 12/24V DC. It has the “test” function. Each channel could fire about 20pcs igniters if by AC, about 10pcs igniters by DC. This series firing system could “salvo fire”,“sequential fire” and “step by step fire”.Time range is from 0.1-9.9s. It can be remote and manual control.
Connet & Test
1. Pls put the power plug of firing system into 220V/110V AC, or connecting DC by DC plug on machine.
Pls turn on the power switch, then move the button to “test”position. If the power lamp light and time table shows:9.9s.It indicates the system is in good condition.
Pls connet the products into black & red clip. There are LED for each channel. If the LED turns red.It indicates that products are connecting well. It’s very easy for “test”
Pls move the button to “fire”position, then you can fire.
Salvo fire & Seqential fire
Salvo- The time table shows: 9.9s when the power was ready. After you press button”time”one time, the time table will change to 0.0s. Pls press”salvo”button now.
Sequential- Once you press the “time”button one time, the sequential time will add 0.1s. When it is adjust to the time that you need , pls press “rapid” button , it will make firing system sequential fire. If you need reset sequential time, pls cut off the power for about 2 seconds.
Step fire- Pls make sure that the time table shows 0:0. Then pls press “step”button or “1.2.3”button one by one. Both way will make it fire step by step.
Number of cues- What the time table shows is the sequential cue numbers during the sequential fire.
Attentions;
1. Please don’t make it to be short circuit for that would damage machine.
2. If connecting products in series, Because the resistivity of ignition dissimilarity from different factory , please use the products which made by the same factory;
3. Please turn off the power switch when the circuit connecting but no need use it , and notice to do not shake machine violently;
4. Don’t press “FIRE” after pull out electrical outlet, for there is left power would ignite products;
5. Please don’t place the product in the damp , sour ,alkali and pollution environment.
Accessories & Parameters
Channels- 20
Weight- 4KG
Demension- 37*23*13CM
Remote range- 80-100M.
Remote frequency - 315MHZ
Safey switch for “test”and “fire”
Pls move the switch to the “Remote”position. The transmitter is divided into A and B parts. Pls frist press NO”11”button, then you can fire “A”part.
If you press NO“12”button, you could control part“B”on the receiver.
Click enlarge Image
