Smartech 18 Magic Wheel Gas Powered RC Car

Quick Detail

Package & Delivery Lead Time

Detailed Description

:8 SCALE GAS POWERED 4WD OFF-ROAD TRUCK OIL-DAMPENED SUSPENSION TRAVEL READ-TO-RUN;NITRO 4-WD 2-SPEED TRANSMISSION TOTAL-ASSEMBLED CHASSIS SUPER CX15PENGINE FOR CARBURETOR SUPER MUFFLER AND AIR FILTER GROUND CLEARANCE(4 INCHES),AND OVER 3 1/2 INCHES OF PLUSH FRONT AND REAR BEVEL GEAR DIFFERENTIAL 8 SPECIAL OIL-FILLED SHOCK ABSORBER HARD ALUMINUM ALLOY CHASSIS 2 CHANNEL TRANSMITTER INCLUDED -------------------------------------------------------------------------------- Specification -------------------------------------------------------------------------------- LENGTH--------------486mm FRONT TRACK-------375mm REAR TRACK--------425mm WHEELBASE---------300mm TIRES----------------5.75"*3" WHEEL DIAMETER----162mm FULL SPEED---------50KM/HR HEIGHT (OVERALL)---264mm Packing Details -------------------------------------------------------------------------------- Each car in a color box, 2 pcs in a carton Carton size: 65*40*61 cm G.W: 14.00 Kgs Start the Engine 1. The process of cleaning before driving your car: For cleaning the engine,1-2 tank oil"s use is a standard,and then run your car slowly to run out of another 1-2 tank oil,all ways down,the cleaning work is over,the car can run normally; 2. Turning on the transmitter and the receiver: Extending the antenna of the transmitter and the receiver,and then switch on the transmitter and the receiver in succession; while switching on the receiver,make sure the carburetor is at the neutral position. 3. Fill the fuel: Filling the special model"s fuel,and mix the gas and the lubricating oil,the rate of the gas to the lubricating oil is 25:1; close the fuel tank"s cover and fasten it after it after filling the fuel. 4. Starting the engine: Pushing the front valve several times until securely streaming out oil; shut down the wind gate,and turn the accelerograph to the position that spaces 1/4-1/3 place of opening; pull the pulling-start rod until engine send out sound of start to start engineadjust the wind gate to the place which spaces 1/4 poistion of opening position; pull the pulling-started rod quickly; start engine several minutes to prewarm. 5. Stop the engine: The engine will immediately stop running as long as you press the stall switch of the engine,please refer to the instruction manual(g230 RC) for more details. More Pictures

Basic Company Information

暫無

Company Advantage

Detail Company Introduction