Our temporary fence is a reusable portable panel system made of Q235 steel, including welded mesh, chain link, square frame fence and crowd control barrier. Standard heights range from 1200mm to 2000mm, with common widths 2000mm, 2400mm and 2500mm. Finishes include hot-dipped galvanized and powder coating. Equipped with removable weighted feet and connecting clamps, it requires no permanent foundation. Widely used for construction sites, public events, parking lots and emergency zoning.
Temporary fence is a portable, reusable panel system for construction sites, swimming pool perimeters, public events, parking lots, storage yards, and emergency work zones. Panels connect via clamps and rest on removable weighted feet, requiring no permanent foundation. Common types: welded mesh temporary fence, chain link temporary fence, square frame fence, crowd control barrier. Height, width, wire diameter, mesh size, frame tube, feet, clamps, and braces are selected based on site wind load and security needs.
Panel Height(standard): 1200mm, 1500mm, 1800mm, 2000mm
Panel Width(standard): 2000mm, 2400mm, 2500mm
Wire Diameter(welded mesh): 3.0mm, 3.5mm, 3.8mm, 4.0mm
Welded Mesh Openings: 50mm×100mm, 75mm×150mm, 50mm×200mm
Chain Link Mesh(diamond): 50mm×50mm, 60mm×60mm
Crowd Barrier Infill Spacing(vertical tubes): 100mm, 120mm, 150mm
Middle Rail(welded fence): 20×20mm, 25×25mm
Crowd Barrier Infill Tube : 14×1.0mm, 16×1.0mm, 20×1.2mm
Surface Treatment: Hot-dipped galvanized(standard), galvanized + powder coated(black/yellow/green)
Connector: Top clamp, saddle clamp, hook connector(crowd barrier)
Support Brace : Stabilizer brace + ground pin(required for wind > 30km/h or when shade cloth is attached)
Gate Options : Pedestrian gate, vehicle gate(matching panel height/width)
Packing : Panels stacked on steel pallets; feet/clamps/braces packed separately.





