Manual digital display button battery sealing machine YP-2NS
0 likes
China [CN] Manual digital display button battery sealing machine, small in size and light in weight, can be operated in a glove box.
Suitable for use with CR16, CR20, CR24 and CR30 battery cases.
Instrument model | YP-2N |
Pressure limit | 0-2T (2-26MPa) |
Piston diameter | Chrome plated cylinder 33mm |
Massive structure | Integrated structure |
Pressure gage | Digital display: 0.00-2.00T |
Standard tooling | Standard CR20 series package mold |
Sealing die | Optional CR16, CR20, CR24, CR30, etc |
Sealing pressure | Generally between 0.8-1.2 tons |
Remover mold | Optional CR16, CR20, CR24, CR30, etc |
Stripping pressure | Generally within 0.4 tons |
Size | 210×166×292mm |
Weight | 12Kg |
Place the assembled button battery into the sealing mold of the sealer.
Tighten the oil drain valve of the sealer clockwise.
Move the handle lever back and forth to apply pressure.
The pressure will reach approximately 6–8 MPa (about 1000–1200 kg).
Loosen the oil valve counterclockwise to release the pressure and lower the mold back to its initial position.
Remove the sealed button battery from the sealer.
Place the tested button battery into the disconnecting mold.
Apply pressure of about 2–5 MPa to separate the sealed button battery.
Loosen the oil valve counterclockwise to release the pressure and lower the mold back to its initial position.
Remove the separated button battery from the sealer.
Click enlarge Image