Solid battery die HMN-PG
0 likes
China [CN] The die material is made of PEEK and ceramic core, and the diameter can be customized as per requirements.
Instrument model | HMN-PG |
Shelf material | 304 Stainless steel |
Mold material | PEEK Insulating material |
Indenter material | 3Cr13 Stainless steel |
Sample size | Φ8, 10, 12, 12.7, 13, 20mm (d) |
Die size | 50×90mm (M×L) |
Size | 100×140mm (D×H) |
weight | 2.5Kg |
Place the sample into the solid-state battery mold.
Assemble the battery specific Dies and place it into the carrier. Tighten the nut.
Place the mold in the center of the hydraulic press to ensure the hydraulic orifice is ventilated.
Tighten the front knob to the right.
Swing the lever to apply pressure up to 1 ton, hold the pressure for 1 minute, then remove the mold.
Connect the air nozzle to the positive and negative electrodes for detection.
Click enlarge Image