Drawing Machine For Brass Wire
0 likes
China [CN] 1. Application:
This machine is used for drawing fine brass wire 0.12-0.40mm from max input wire 1.2mm.
2-Main feature:
Traversing was controlled by 110W belt-type synchronous motor, stable and fast response. Linear bearings are slide rails, with high rigidity and low wear.
1)Max.Dies Qty: 24
2)Outlet wire size: 0.12-0.4mm
3)Max speed: 1500m/min
4)Dual Inverter control
3-Parameters:
Machine type | SY-24B |
Control system | Traditional analog type Computer digital control |
Inverter control | Dual Inverter control |
Drawing dies No./Max. | 24 |
Inlet diameter | 0.60--1.20mm |
Outlet diameter | 0.12--0.40mm |
Drawing line speed | 1500m/min |
Frame | Welded by steel |
Capstan | Ceramic type |
Main motor | 15KW |
Spooler motor | 2.2KW |
Spool bobbin size | 160-250 Plastic Bobbin |
Transmission type | Teeth belt + Flat belt |
Machine dimension (mm) | 2000×1600×1900 |
Machine weight | 2500KG |
4-Advantage:
1.Double drivers ensure precisely tension and minimum ratio of the wire.
2.Energy saving and excellent wire surface quality with full immersed type
3.Best choice for diversify products manufacturer.
4. Straightening device of outlet wire ensure the EDM wire quality.
5..Drawing Machine For Brass Wire support pneumatic type take-up, which is suitable for small plastic bobbin.
Click enlarge Image