China OEM SLST3000 Large Hydraulic Ecological Wall Production Line Supplier
0 likes
China [CN] In addition to meeting the requirements for hydraulic brick production, the equipment can also switch molds to produce high-value-added products such as PC imitation stone bricks, curb stones, and permeable bricks, enabling customers to achieve rapid economic benefits.
In 2022, Sanlian Machinery launched the SLST2400 super large-scale hydraulic brick production equipment, primarily targeting the production of large-scale hydraulic bricks and retaining wall blocks with a molding area of up to 1500x1300x600mm. By 2024, Block Machine Supplier achieved another technological breakthrough, producing the largest domestic hydraulic bricks and retaining wall blocks with sizes up to 1900x1320x800mm,the device model has been upgraded from SLST2400 to SLST3000.
1. Before starting the machine every day, check whether all parts are loose, damaged or leaking, especially the hydraulic system connectors and pipes.
2. Check the oil level and oil quality to ensure that the hydraulic oil is clean and free of impurities, and the oil level is within the indicated range. Replace the hydraulic oil regularly. It is generally recommended to replace it every six months or according to the frequency of use and the condition of the oil.
3. Check whether the electrical system is normal and whether the line is worn or exposed.
4. Clean the dust and residual materials on the Block Machine Supplier and Manufacturer in China regularly to prevent blockage and corrosion.
Clean the mold to ensure the molding quality and avoid product defects caused by unclean molds.
5. Check and clean the filter of the hydraulic system to prevent blockage from affecting the smooth flow of the oil circuit.
6. For moving parts such as bearings, guide rails, gears, etc., add lubricating oil or grease regularly to reduce wear and keep smooth operation.
7. Regularly check and tighten all screws, bolts and other fasteners to prevent loosening due to vibration.
8. Regularly check the working status of hydraulic components such as hydraulic pumps, valve bodies, and cylinders, and replace severely worn seals and wearing parts in time.
9. Monitor the operating temperature of the hydraulic system. If it is too high, check whether the cooling system is working properly.
Model | SLST3000 |
Pallet Size(mm) | 2400*1400 |
Max.Molding Area(mm) | 1900*1320 |
Product Height(mm) | 45-800 |
Production Mode | pure vibration |
Servo Drive Shaft | 8 |
Main Oil Cylinder Tonnage/T | 28 |
Excitation Force/KN | 550 |
lf the required pallet size or product heights are not listed here, we are happy to make special plans for you. | |
Brick Size | Production (Per mould) | Production (8h one shift) |
Hollow Brick 390x190x190mm | 21 | ≈40,000 PCS 560m³ |
Solid Brick 240x115x53mm | 120 | ≈288,000 PCS 420m³ |
Paver 200x100x60mm | 78 | ≈112,300 PCS 2200m² |
Difference between different raw material and ratio and production mode | ||
1、Extra Large Molding Area
1900*1320*800mm
1300*1300*500mm
The biggest feature: can support a maximum forming area of 1900mm*1320mm*800mm
breaking the industry’s molding limit of 1300mm*1300mm*500mm
2、High End Servo Eight Shafts Dual Vibration System
3、Vibration Table Suspension System
4、Front and rear dual drive design on material,charging for precise and fast unloading
5、Closed-loop servo hydraulic system: energy-saving, noise reduction, constant temperature.
6、Design of main castings, firm and stable, durable and long-lasting.
Click enlarge Image