PTO Shaft for Round Balers

PTO Shaft to New Holland Round Balers

Our PTO Shaft Adaptable Models

New Holland Round Balers

Models: BR7050, BR7060, BR7070, BR7080, BR7090

New Holland calls for CAT3, CAT4, and CAT5 constant-velocity drivelines, based on the model and different torque limiters.

For input shafts, we recommend 1.375-6 and 1.375-21. We can help you with your requirements.

Available for tractors that use 1.375-6 or 1.375-21

Input shaft 1.375-6 or 1.375-21

Other combinations are also available.

MODEL

HP

CAT

TOQUE DEVICE

BR7050

40

CAT3

SHEAR BOLT

BR7050 H

45

CAT3

SHEAR BOLT

BR7060

60

CAT4

SHEAR BOLT

BR7060 STD

60

CAT4

SLIP CLUTCH

BR7060 in SS

65

CAT4

SLIP CLUTCH

BR7060 C

100

CAT5

CUTOUT CLUTCH

BR7070

70

CAT4

SLIP CLUTCH

BR7070 in SS

70

CAT4

SLIP CLUTCH

BR7070 C

105

CAT6

CUTOUT CLUTCH

BR7080

70

CAT5

SLIP CLUTCH

BR7090

80

CAT5

SLIP CLUTCH

PTO Slip Clutches for Shafts, Shear Bolt Clutches

Constant Velocity PTO Tractor Base Part Number Implement Device

CAT3/540

1.375-6

71R4121UCW07000

should be specified

CAT4/540

1.375-6

7G7R121U2WR7R07

It is essential to specify

CAT4/1000

1.375-21

CS6R121U2WR8000

It is essential to specify

CAT5/540

1.375-6

71R8121UCWR7R10

should be specified

CAT5/1000

1.375-21

CS8R121U2WR8000

should be specified

Round Baler PTO Shaft Advantages / Features:

1. Materials:

Our company has bought steel from several big steel corporations, like Hangzhou Steel Mill, Shanghai Bashan Steel Mill, Beijing Shrugging Steel Mill which steel has excellent mechanical properties and are stable of chemical components. The shaft is guaranteed to be of high-quality.

2. Manufacture Procession

We have first, our own high-precision digital machining center for mould manufacturing in our specially designed Mould Workshop, excellent mould give the product a beautiful look and also accurately measure its size.

The third, we use a blasting process, which removes the Oxidation layer, causing the surface appear clear and smooth, and attractive.

The third, in heat treatment: We use the Controlled-atmosphere Automatic heat treatment Furnace,

3. Quality Control:

The quality control process is rigorously carried out starting from the time you purchase raw materials at the warehouse, through manufacturing processes and finally packaging. 100% inspection during production.

4. Capacity for Production

One PTO shaft, once a month, could produce 16000 pcs.

PTO Shaft Application

If the device doesn't possess an engine of its own It will be being utilized. For instance, you'll often find power takeoffs in agricultural vehicles and commercial equipment. In reality, PTO shaft innovation mainly is a result of the experience of farmers. The tractor engine can be used as an PTO shaft to drive the jackhammer and other equipment.

Other uses for PTO shafts are:

(1) Wood chipper

(2) Baler for Hay

(3) Harvester

(4) A mechanical arm

(5) Water pump

Tips for Using the Round Baler PTO Shaft

In order to maximize efficiency of work, to ensure reliability of the work and increase the lifespan of the equipment also, agricultural machines will be used in conjunction. This article will provide an overview of the usage of agricultural equipment the PTO drive shaft installation must be coordinated. Take the baler that is combined as an illustration the following issues with the transmission shaft must be considered when using the tractor.

1. When installing the packing machine the PTO shaft must be aligned that is parallel to the PTO shaft on the tractor crawler.

2. The PTO drive shaft assembly plays an a crucial component in the transmission of power from tractor. While setting up the PTO drive shaft assembly it is important to note to note that two of the dips on the intermediate shaft for power output should be placed on the exact plane. It is simple to install mistakes and not pay careful consideration. If the direction of opening is stowed 90deg It is not difficult to break the cross-joint of PTO shaft. PTO shaft.

3. If the ground is turning in a direction, it is recommended that the PTO drive shaft must be disconnected, the rototiller must stop before reconnecting after the turn. Otherwise it will waste energy as the drive shaft could be pushed over the chain limit.

4. Due to the huge work resistance for the baler it's important to add lubricating oil on the gearbox intermediate as well as PTO drive shaft frequently during the process of using it to minimize wear.

Round Baler PTO Shaft Maintenance

The PTO shaft needs to be greased regularly to prevent universal joint from failing, and also to prevent the shaft from sizing. If you do not maintain your shaft's grease regularly or as specified in the PTO maintenance schedule of the shaft can result in the end thrust damaging the gearbox in the implement. It is recommended that you grease regular universal joints every 20 hours , or every 8 hours in extreme situations. Remember! grease follows the simplest route through internal ports, eventually reaching those four cross bearings. A high temperature or poor quality grease that is baked in one port can block grease from getting to the bearing, leading to failure of the individual cross bearings. Make sure you completely remove the guard cover to ensure that grease flows across the entire cross bearing. Greasing the small access hole isn't good enough. Check the condition of the PTO safety guards. If they're damaged or are in poor condition , replace them to ensure the safety of the driver.

Round Baler PTO Shaft Length Requirements

PTO shaft PTO shaft acts as the mechanism which supplies the power to your device. Therefore, it is crucial to be aware of how it functions to ensure the safety of users. It is also essential that you are aware of the maintenance specifications to avoid any mechanical issues. PTO shafts come with a rating and are not always interchangeable with round balers or implements. It is therefore essential to match the correct shaft on the appropriate implement in accordance with the specifications of the manufacturer and also to ensure that it's the right length.

Long: The length of the PTO shaft is determined by setting up an implement in an open baler round in the beginning. If you want to reduce the length of PTO shaft is required , the operator should use the supplier's method to reduce the shaft to the proper length. This is usually accomplished by measuring the output shaft of the round baler and then transferring the input shaft of the place it the point at which the PTO shaft is at its narrowest.

Too long When your shaft for PTO is excessively long (or are the Telescopic tubes jammed) "end thrust" could occur, which could cause damage to the internal PTO drive, clutch for implements or gearbox, possibly invalidating your warranty on the machine.

Too short: If the shaft is too long, it may possibly split from the implement, causing significant safety concerns and possibly injury.

PTO Shaft for Agricultural Gearbox

Agricultural equipment includes various PTO shafts. Each shaft is connected via two yokes and is able to rotate between the 540 and 1000 rpm. Safety Universal PTO shield is typically placed on both sides of a shaft for PTO to safeguard the operator. They are also present in tractors as well as agricultural equipment, which ensures maximal effectiveness. Internal yokes can also provide additional security.

This farm gearbox is designed to alter the speed of output of the PTO drive shaft. It can be utilized as a decreasing or an increasing ratio gearbox. In the gearbox with a decreased ratio it decreases it's PTO shaft's speed from 1,000 RPM to 540 rpm permitting you to use equipment that is designed to operate at speeds of 540 rpm. However an increase ratio gearbox will increase speeds of PTO shaft to 540rpm to 1,000 rpm.

If you are also in need of agricultural gearboxes, you can get in touch with us for more details.

Round Baler PTO Shaft Manufacturer

HZPT is spread over greater than 12000 sq metres and employs over 100 employees. We focus on developing manufacturing, selling, and manufacturing PTO shafts industrial universal shafts, automotive drive shafts universal joint universal joints, coupling shafts and more. The annual revenue is 60 million yuan , and nine millions US dollars, and is growing each year. Our products have a good standing among our customers in Europe as well as America, Europe United States, Asia, Australia as well as North America. We are among the three top professional OEM suppliers to a variety of agricultural tool manufacturers on the domestic market. HZPT transmission shaft is in line with our "QDP" concept: Quality first, speedy delivery, and a competitive price. We have achieved CE, TS/16949 and ISO9001 certifications and use a systematic production equipment as well as an QC staff to guarantee quality and speed of delivery. We are open to friends from all kinds of backgrounds to come and visit and form lasting, mutually beneficial relationships.

Select the Correct PTO Shaft

The choice of the PTO shaft is vital in order to supply enough power to the equipment that is auxiliary without restricting the primary functions of the primary mover. The choice for the PTO shaft is dependent on specific information for the application and also what power needs of drive or auxiliary components.

Here is a brief list of PTO shafts to consider when selecting a shaft:

*The requirements for torque and horsepower for drive components

*Continuous operation or intermittent

*Application usage

*Speed requirements for driven parts

*Mounting face dimensions and other options

Space allocation

The PTO is a shaft-based participation model.

With these specifications, the selection of the PTO an easy task.