EDFA Gain Range 1535nm ~ 1565nm Gain Range; PM Fiber
User Adjustable Output Power
User Control of Current Level to Internal 976nm Pump Laser Diodes
Manufactured by Amonics for Laser Lab Source
OPTICAL SPECIFICATIONS
Output Power Range: Adjustable up to 1 W (+30 dBm) @1mW laser input power
Operational Gain Wavelength Range: 1535nm - 1565nm
Acceptable Input Laser Source Power Range: -6 dBm to +3 dBm
Input Isolation: > 30 dB
Output Isolation: > 30 dB
Noise Figure: 6.0 dB (at 0 dBm Input)
Standard User Control Mode 1: ACC (user adjustable pump current levels)
Optional User Control Mode 2: APC (optical output power feedback; optional)
Polarization Extinction Ratio: > 20 dB, 23 dB typical
Power Adjustment Step Size: 0.01 dBm
Gain Medium: Erbium Doped Fiber
Fiber: PM 1550nm Panda Fiber
Loss of Input Signal Shut-Down Protection Circuit
TEC / Temperature Control Limit Pump Laser Overheat Warning Protection
Rear Panel Safety Interlock Protection
Acceptable Input Laser Source Power Range: -6 dBm to +6 dBm
USER INTERFACE (ALL MODELS)
Alphanumeric Color Front Panel Interface w/ Adjust Knob
Remote: RS232, LabView Control Software Included
Remote: RJ-45 (TCP/IP Ethernet optional)
Optical Connectors IN/OUT: FC/APC
Optical Fiber Options: PM fiber, (SMF-28 optional)
GENERAL SPECIFICATIONS (ALL MODELS)
Operation Temperature: 0 to 40 ℃
Required Shore Power: 90-240 (VAC), 47-63 Hz
Dimensions: 260mm x 330mm x 120mm
Power Monitoring: Output Power (Input Power Optional)
Remote Control RS2323 Port: DB-9 female
TCPIP/Ethernet optional
Protection: Pump Lasers (TEC) Over-Temperature
Protection: Pump Lasers Current Limit
Optical Fiber: PMF Panda 1550nm PM Fiber
Connectors: APC (Others Available on Request)
Safety Control 1: Key-Lock Switch
Safety Control 2: BNC Interlock
Safety Control 3 (10 Watt): e-Stop
Safety Control 4: Loss of Input Power Detection and Pump Shut Down
APPLICATIONS FOR HIGH POWER EDFA'S
Laboratory R&D
SONET/SDH System
Optical Communications
Fiber Optic Sensing
CATV and Telecommunications R&D