API610 BB4 multistage high pressure pump/BFP pump

본문 바로가기


Home > Product > API610 BB4 multistage high pressure pump/BFP pump
Product
API610 BB4 multistage high pressure pump/BFP pump
Posting date : Jan 23, 2019
Membership
Free Member Scince Aug 01, 2018
FOB Price
1
Min. Order Quantity
1 set
Supply Abillity
1,000 units per month
Port
tianjin
Payment Terms
TT, LC
Package
Wooden box
Keyword :
Category
Contact
Boone Wang
          0 likes     
Product Detail
Company Info
 
Quick Detail
Place of Origin
China [CN]
Brand Name
-
HS-CODE
-
Package & Delivery Lead Time
Package
Wooden box
Delivery Lead Time
10-50days
Detailed Description

API610 BB4 multistage high pressure pump/BFP pump

API 610 Standard Pump

Design:
All parts and components of the SBD series pumps are designed as interchangeable standard parts, which greatly helps to reduce the storage of spare parts. 
Intermediate Casing
O-rings are designed between intermediate casings when connecting the sections with tie-bolts. Metal gaskets may also be used to replace the O-rings in case of necessity. 
Suction and discharge casings are normally supported with feet construction. However, center supports are used for SBD150, as well as SBD80 and SBD100 when Temp. of pumped media exceeds 150℃.
Hydraulic Model and Balancing of Axial Force
Two different hydraulic models (Impellers and diffusers) are designed for each specification and model to expand the operating range with high efficiency. Replaceable wear rings are adopted for  sealing between impeller and casing.
Most of the axial forces shall be balanced by hydraulic balancing device (drum) and the residual force shall be borne by thrust t bearings.
All SBD pumps are oil lubricated, except SBD25 which is lubricated with grease.
Performance Data:
Capacity:                   Up to 500m3/hr
Head:                        Up to 1200m
Operating Press.:      Up to 15MPa
Operating Temp.:      -80 ~ +180℃
Applications
Water supply, Thermal power plant feed water pump/cooling water pump, Pipeling pressure boosting, Refrigeration project
Flanges
Discharge flanges and suction flanges of center supported pumps are designed as Vertical up, while suction flanges for foot supported pumps can be arranged in any direction.
Shaft Sealing
In general, balanced type Mechanical seals shall be used for shaft sealing. Soft packing is also applicable if necessary.
Shaft seal shall only bear as much as the suction pressure because discharge pressure shall be reduce after passing through the balancing drum.
Packing gland shall be cooled in case the temperature of flushing liquid is higher than 110℃. And the whole packing box shall be cooled if the temperature of flushing liquid is higher than 130℃
Driving End & Rotation
Driving end of the pump is designed at the suction side and CW rotation shall be viewed from the driving end.

More information you can view here.


ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us
Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea
About Us Privacy Policy Terms of use Copyright © 2000-2024 ECROBOT.COM. All rights reserved.
Top