Heavy Duty Cable Tray Manufacturing Machine 1.2-2.0mm Thickness Gear Driver

Quick Detail

Package & Delivery Lead Time

Detailed Description

Automatic Galvanized Steel Cable Tray Cold Roll Forming Machine It mainly used in the cable system,this also need the cable tray channel support. 1 Equipment capabilities It can according to the need to produce the steel width (60mm860mm), many kinds of specification electric cable bridges and other structure product. Product speed by punching: 2.55m/min Continuous rollforming speed: 1015m/min Material thickness: 1~2mm Material require: Q235 cold roll steel Production line has automatic and manual two operating mode, may realize the linkage and the partition revolution work. 2 Machine Working Craft This unit consists of the decoiler, ML-900 flatting, punchig press, die, servo feeding, guider, main roll forming machine, hydrauliccutting, cut-to-length part, electrical control cabinet; etc. 3 Each part major technical parameters 3.1 Drive decoiler Material width:860mm Material weight:6000kg Material inner diameter:508mm Material outer diameter:1200mm Drive power: electromotor and speed reducer integration, 4KW frequency conversion electromotor Frame type: cantalever inner support, manual handle afterbody, pneumatic press cantalever. 3.2 Straightening Device Working rolls: 11 rolls, up 4/down 5, the residual 2 rolls is clamp deliver rolls. Flatting bound: material thickness 12mm, material width 100--860mm Drive power: 5.5kw frequency conversion electromotor Speed reducer model: ZQ250 flatting speed:3-10 m/min Parenthesis up and down a pair of fortified wheel 3.3 Continual punching mould Amount: Each kind of width specification 1 set dies, total 6 sets Combination Punching Mould:1 set It finishes punching and cutting in one time. 3.4 Servo feeding Device Servo electromotor power: 4.4kw Multistage type feeding, memory ten group of memory functions Man-machine contact surface numerical control system Uses Mitsubishi servometer 3.5 Holds material (use in cushion section) The roller type, the both sides have the bearing support, 3 sets, use in holding the material and under the deposited material spacing. 3.6 Guider A pair of horizontal roller and two pairs of vertical guide rolls, total 1 sets. 3.7 Main roll forming machine Type: GY180(Extra wide) Rack structure:Dragon Gate type memorial arch frame forming frame: 22 sets Forming variety: bridge frame material max width:860mm material max thickness:2.0mm forming width: 75-600mm forming height: 50-100mm The diameter of the roller axis: 85mm Roll mould material: Gcr15,quenching treatment:HRC58-62 Drive type:30kw frequency conversion electromotor, ZQ500 Main speed reducer 3.8 Electrical control System 3.8.1 Main operation control cubicle Amount: 1 set Frequency conversion: 3sets(in main control cubicle, control decoiler, flatting and roll forming machine) PLC control: 1 set 8 inch liquid crystal touchscreens All electrical element is the Mitsubishi original installation brand 3.9.2 Assistant control cubicle Amount: 3 sets (follow decoiler, flatting, roll forming machine) Control style: manual handle 5 Machine Parameter - - - - NO. | Project | Unit | Parameter | Remark | 1 | Material | Type | High strength steel | | | Strength of material sheet | Map | 350 | | Thickness of material sheet | mm | 1.2~2.0 | | 2 | Size of production | mm | Reference the picture | | 3 | Production speed | m/min | Punching speed 4m/min Forming speed 10m/min | | 4 | Material of roller | | GCr15 quenching treatment | | 5 | Drive type | | Gear | | 6 | Power | kw | About 75 | | 7 | Electric control system | | PLC variable frequency control | | 8 | Dimensions(Length*width*height) | m | 55X4X3.9 | | - - - - 6 Cable Tray Profile

Basic Company Information

Jiangyin Bosj Science & Technology Co., Ltd.

Company Advantage

Detail Company Introduction