Epoxy Resin Cast Zero Sequence Current Transformer Split Core Type High Voltage

Quick Detail

Package & Delivery Lead Time

Detailed Description

120mm High Voltage Cast Epoxy Resin Split Core Zero Sequence Current Transformer Theory Current transformers typically consist of a silicon steel ring core wound with many turns of copper wire as shown in the illustration to the right. The conductor carrying the primary current is passed through the ring. The CT's primary, therefore, consists of a single 'turn'. The primary 'winding' may be a permanent part of the current transformer, i.e. a heavy copper bar to carry current through the core. Window-type current transformers (aka zero sequence current transformers, or ZSCT) are also common, which can have circuit cables run through the middle of an opening in the core to provide a single-turn primary winding. To assist accuracy, the primary conductor should be centered in the aperture. Applications LZCK2500-10 zero sequence current transformer is suitable for current measurement and microcomputer protection of electrical equipment in 10KV and 35KV AC power system. It is widely used in compact fully insulated ring network switchgears such as ABB-Safe Ring/Safe Plus...and cable distribution boxes. The current transformer can be directly installed at the inlet andoutlet cables.The slice is imported silicon material. Thesemicircular ring core and secondary windings zero sequence current transformer is mainly measurement current for Protection device Features New magnetic material is taken to be the core of the current transformer, which has high magnetic permeability, low saturation magnetization and good stability. Therefore, the measuring accuracy is higher and the instrument security factor is lower. Since the high quality silicon processed by advanced technology is taken to be the core of the protection windings, which assured the accuracy limit factor is higher. The semicircular ring core and secondary windings are vacuum poured by high quality epoxide resin in the fire retardant plastic casing, which has the characteristic of moisture proof, stable performance and dispensing with maintenance.Small size, light weight, small footprint, fixed in the ring network switchgear cable.The cable can cross the current transformer through its internal poles quickly and uniformly. The Cast Resin Straight-Through Current Transformer can be divided several kinds according to the various current ratio, accuracy and rated loads. The specific parameters are showed in the corresponding to each model parameter tables. PARAMETERS - - - - Technical parameters Standards | IEC60044-1; IEC 61869-2; NTC 2205; ANSI C57.13; GB1208-2006 | Rated primary current | 100-1500A | Rated load | 20VA | Rated frequency | 50Hz or 60Hz | Rated secondary current | 5A or 1A | Rated short-time thermal current | 40kA, 1S | Rated continuous thermal current | 120%I1n | Secondary winding power-frequency voltage | 3kV, 1min | Instrument security factor | FS10 | Mechanical parameters Dimensions (WDH) (mm) | 120x185x100 | Weight (kg) | 7 | Operating conditions Operating temperature | -35C to +55C | Daily average temp | <+40C | Storage temperature | -40C to +70C | Altitude | <3500 meters | Condition | No existence of severely begrimed, erosive and radioactive gas in the air. Permission of long-term operation under rated current. | - - - - SELECTION GUIDE - - - - TypeLZCK2500-10LZCK2500-10 PurposeMeasuring current transformerProtection current transformer RatioAccuracy class and rated load(VA)Accuracy class and rated load(VA) I1/I2 | 0.5 | 1 | 3 | 10P15 | 10P10 | 10P5 | 300/5 | 5 | 5 | 5 | 2.5 | 5 | 7.5 | 400/5 | 5 | 5 | 5 | 2.5 | 5 | 7.5 | 500/5 | 5 | 7.5 | 7.5 | 5 | 7.5 | 10 | 600/5 | 5 | 7.5 | 7.5 | 5 | 7.5 | 10 | 800/5 | 10 | 10 | 10 | 5 | 10 | 15 | 1000/5 | 10 | 15 | 15 | 5 | 10 | 15 | 1200/5 | 15 | 20 | 20 | 10 | 15 | 20 | 1500/5 | 15 | 20 | 20 | 10 | 15 | 20 | - - - - SELECTION GUIDE - - - - ModelPrimary rated currentRated loadAperture (mm)Description (mm)Weight (kg)MaterialWater-proof LZCK-55 | 100-1500A | 10VA | 55 | 18013852 | 2 | ABS+Resin | IP65 | LMCK185-10 | 300-3000A | 25VA | 185 | 35028355 | 4.5 | ABS+Resin | IP65 | LZCK310-10 | 300-600A | 10VA | 50 | 50 x 110 x 32 | 1 | Resin | silicon case (option) | LZCK322-10 | 30-600A | 10VA | 50 | 50 x 110 x 52 | 1.6 | Resin | silicon case (option) | LZCK350-10 | 20-600A | 25VA | 50 | 50 x 110 x 105 | 3.1 | Resin | silicon case (option) | LZCK720-10 | 20-1000A | 25VA | 60 | 80 x 110 x 50 | 2.1 | Resin | silicon case (option) | LZCK2500-10 | 500-1500A | 20VA | 120 | 120 x 185 x 100 | 7 | Resin | silicon case (option) | LZCG530-10 | 30-600A | 20VA | 45 | 45 x 120 x 65 | 2.1 | Resin | silicon case (option) | LZCG930-10 | 100-1500A | 25VA | 60 | 60 x 155 x 60 | 3.6 | Resin | silicon case (option) | LZCT722-10 | 20-600A | 10VA | 82 | 82 x 130 x 55 | 2.3 | Resin | silicon case (option) | - - - - WIRING DIAGRAMS P1, P2 is primary polarity terminal, S1, S2 is secondary polarity terminal. P2, S2 is homonymous terminals (subtractive polarity).

Basic Company Information

Beijing GFUVE Instrument Transformer Manufacturer Co.,Ltd.

Company Advantage

Detail Company Introduction