Mechanical Articulating Joint Rod End Plain Bush Bearing GE GEC GEG GEEW GEK GEH

Quick Detail

Package & Delivery Lead Time

Detailed Description

Rod Ends Bearings Mechanical Articulating Joint GE GEC GEG GEEW GEK GEH Rod Ends is a mechanical articulating joint. Such joints are used on the ends of control rods, steering links, tie rods, or anywhere a precision articulating joint is required, and where a clevis end (which requires perfect 90 degree alignment between the attached shaft and the second component) is unsuitable. A ball swivel with an opening through which a bolt or other attaching hardware may pass is pressed into a circular casing with a threaded shaft attached. The threaded portion may be either male or female. The hemi joint's advantage is that the ball insert permits the rod or bolt passing through it to be misaligned to a limited degree (an angle other than 90 degrees). A link terminated in two hemi joints permits misalignment of their attached shafts (viz., other than 180 degrees) when used in tension. When used in compression, the through-rods are forced to the extreme ends of their ball's misalignment range, which cocks the link at an oblique angle. - - - - - - - - Tolerances for Rod ends | - - - - - - - - 1> The tolerance of dmp and Bs of GIRDO,GAR..DO,GIRUK, GARUK, GIR..UK-2RS,GARUK-2RS and GIHRDO, | GIHR-KDO, GIHO-KDO, GKDO, GFDO, GIR..UK-2RS,GARUK-2RS are the same as radial spherical plain bearings | GE...E,GE...ES,GEUK,GEUK-2RS. | | 2> The dmp and Bs of GIHN-KLO, GFLO are the same as radial spherical plain bearings GELO. | 3> The dmp and Bs of SIBP...S,SABP...S,SIZP...S,SAZP...S,SAZJ...-and SAZJ... are the same as radial spherical plain bearings GEBK...S. | 4> Series CHS..., COS | | - - - - - - - - d mm | dmp um | Bs um | over | incl. | max | min | max | min | - | 6 | 12 | 0 | 0 | -150 | 6 | 10 | 15 | 0 | 0 | -150 | 10 | 12 | 18 | 0 | 0 | -150 | 12 | 18 | 18 | 0 | 0 | -200 | 18 | 30 | 21 | 0 | 0 | -200 | - - - - - - - - | | | | | | | BBB> Center height deviation | - - - - - - - - d mm | hs mm | h1s mm | over | incl. | max | min | max | min | - | 6 | 0.8 | -1.2 | 0.65 | -1.05 | 6 | 20 | 0.8 | -1.2 | 0.8 | -1.2 | 20 | 30 | 1 | -1.7 | 1 | -1.7 | 30 | 45 | 1.4 | -2.1 | 1.4 | -2.4 | 45 | 60 | 1.8 | -2.7 | 1.8 | -2.7 | 60 | 80 | 2.25 | -3.4 | 2.25 | -3.4 | 80 | 125 | 2.7 | -3.4 | 2.7 | -3.4 | 125 | 200 | 3.2 | -4.2 | 3.2 | -4.2 | - - - - | - - - - Radial internal clearance of rod ends | | 1> GIRDO,GARDO, GIHRDO,GIHR-KDO, GIHO-KDO, GKDO, GFDO,GIHN-KLO, GFLO | Series GIRDO,GARDO, GIHRDO,GIHR-KDO, GIHO-KDO, GKDO, GFDO,GIHN-KLO, GFLO | - - - - - - - - d mm | Group normal um | over | incl. | min | max | - | 12 | 23 | 68 | 12 | 20 | 30 | 82 | 20 | 35 | 37 | 100 | 35 | 60 | 43 | 120 | 60 | 90 | 55 | 142 | 90 | 125 | 65 | 165 | 125 | 200 | 65 | 192 | - - - - - - - - | 2> GIRUK,GARUK, GIR...UK-2RS, GARUK-2RS | Series GIRUK,GARUK, GIR...UK-2RS, GARUK-2RS | - - - - - - - - d mm | | Group normal um | over | incl. | min | max | - | 12 | 0 | 32 | 12 | 20 | 0 | 40 | 20 | 35 | 0 | 50 | 35 | 60 | 0 | 60 | 60 | 80 | 0 | 72 | - - - - - - - - | 3> SIZJ...,SAZJ... | Series SIZJ...,SAZJ... | - - - - - - - - d mm | Group normal um | over | incl. | min | max | - | 8 | 10 | 30 | 8 | 14 | 15 | 60 | 14 | 20 | 40 | 80 | - - - - | - - - - - - - - Fits of rod ends | | AAA> Shaft fits | - - - - - - - - Operating conditions | Tolerance | With indeterminate loads | n6, p6 | Normsa conditions | h6, h7 | - - - - - - - - | BBB> thread | - - - - - - - - Male thread | Female thread | 6g | 6h | UNF-2A | UNF-2B | - - - - - - - - | CCC> shaft diameter tolerances | - - - - - - - - shaft diameter mm | shaft diameter tolerances um | h6 | H7 | n6 | p6 | over | incl. | High | low | High | low | High | low | High | low | 3 | 6 | 0 | -8 | 0 | -12 | 16 | 8 | 20 | 12 | 6 | 10 | 0 | -9 | 0 | -15 | 19 | 10 | 24 | 15 | 10 | 18 | 0 | -11 | 0 | -18 | 23 | 12 | 29 | 18 | 18 | 30 | 0 | -13 | 0 | -21 | 28 | 15 | 35 | 22 | 30 | 50 | 0 | -16 | 0 | -25 | 33 | 17 | 42 | 26 | 50 | 80 | 0 | -19 | 0 | -30 | 39 | 20 | 51 | 32 | 80 | 120 | 0 | -22 | 0 | -35 | 45 | 23 | 59 | 37 | 120 | 180 | 0 | -25 | 0 | -40 | 52 | 27 | 68 | 43 | 180 | 200 | 0 | -29 | 0 | -46 | 60 | 31 | 79 | 50 | - - - -

Basic Company Information

ZHEJIANG TOP BEARINGS CO., LTD.

Company Advantage

Detail Company Introduction