BC-216 16 channels Artnet to SPI pixel light controller Led controller
0 likes
China [CN] 16 channels Artnet to SPI pixel light controller Led controller
Product Description
This Artnet-SPI/DMX Pixel light controller is dedicated to converting the Artnet signal into SPI signal,which is designed for large project with high-density pixel light,such as panel lights,construction's contour lamp,etc.Besides converting Artnet based control protocols into various LED driving IC signal , it also outputs DMX512 signal at the same time,convenient for the connection of different types of led lamp,and to achieve the unified control of all kinds of led lamps in the same project. 
Specification :
Feature Function:
1. With LCD display and built-in WEB SERVER setting interface,easy operation
2. Support Ethernet DMX protocal ArtNet,can be expanded to other protocols.
3. Multi SPI(TTL) signal output, up to 5440 pixels control.
4.Output DMX512 signal at the same time, convenient for the connection of different types LED lamp.
5. Support various LED driving IC,flexible control.
6.Support online firmware upgrade
7. Adopt DIP plug-in design for the easily-worn parts,Users can repair the damage caused by worng wiring or short circuit
8. Built-in test mode,using a networking interface with indicator light,work status is clear when at a glance.
Dimension:
Instruction of interface and ports:
Wiring instruction of SPI output:
To output LPD6803/LPD8806/P9813/WS2801 controlling signal, it requires at least three lines:
| DATA | 6803/8806/9813/2801 DATA |
| CLK | 6803/8806/9813/2801 CLK |
| GND | GND, connect with the chip GND |
To output WS2811/TLS3001 controlling signal, it requires at least two lines:
| DATA | Ws2811/ TLS3001 DATA-CLK |
| GND | GND, connect with the chip GND |
Typical Wiring Schematics:
Click enlarge Image