Aluminum profile easy install black rubber stair tread

Impact resistant rounded base non slip rubber stair tread overlay for stair safty

  Over 40% of all workplace accidents are caused by slips and falls. Those that happen where the person falls forward down stairs are most likely to cause severe injuries. Stairs are one of the most hazardous locations in buildings but can be safeguarded from slips and falls with Meishuo non slip Stair Nosing.

Meishuo integrated safety rubber stair nosing is manufactured from reinforced aluminum extrusion complied with ASTM 6063-T5 standard, and inserts with rubber strips.

Meishuo rubber stair nosing is designed to provide optimum slip resistance and luminance contrast on the leading edge of stair and also to protect the stair edge to enhance the service life of the stair. It can be adhesive or screw fixed on the top of stair tread. Also it can be used as a non-slip strip for decks, walkways and ramps. Meishuo rubber stair nosing is mostly applied in shopping centers, hotels, commercial building and other high-traffic areas.

features of Meishuo rubber stair treads: 

• System designed for interior/exterior application
• Suitable for light pedestrian traffic
• Retrofit design for easy installation
• Easy installation& maintenance
• Standard profile length 3 meters
• Factory cut & drilled option available
• Suitable for dry/ wet anchoring
• Made of construction grade aluminum

Our Advantages:

1. Compliant design and a wide range of insert colors enabling visual contrast compliance

2. Commercial grade stair nosing offering an excellent balance between functionality, aesthetics & price

3. Intended for retro-fit/surface mount installations over concrete, timber & tile substrates

4. Premium quality, abrasive carborundum insert for internal applications which is desighed to resist dirt

    entrapment

5. Black, red, green, blue etc. colored inserts available as standard with project colors made to order

6. Easy to clean and maintenance

Installation:

(1) Begin at bottom stair. Carefully lay stair tread upside down on the stair;

(2) Apply a ¼” bead of glue all the way around the perimeter of the bottom side of the tread, keeping approximately ¾” away from the outside edge of tread. Apply an additional ¼” bead in a wavy pattern on the remainder of the bottom side of the tread inside the perimeter bead, as well as a ¼” bead around each predrilled hole approximately ½” from the hole. Note: For exterior installations, substitute clear GE Silicone caulk instead of glue.

(3) Carefully pick up, turn over and place tread on stair;

(4) Push down on tread to distribute glue or caulk;

(5) Be sure ends of tread are equally spaced on stair and that tread is pushed back as far as it will go against front edge;

(6) Using a shop vacuum, hold end of vacuum hose as close as possible to the predrilled hole(s) in the tread in order to vacuum up dust and drillings from hole and tread;

(7) Carefully drill the first hole toward the center of the tread;

(8) Vacuum out all dust and debris from hole;

(9) Screw in and tighten anchor. CAUTION: Using a power driver can strip the fastener. If you use a power driver, use the clutch to help prevent stripping;

(10) Drill and anchor another hole on either end of the tread; 

Application:

APPLICATION  LIMITATIONS:

a) Do not use in grease or oily conditions

b) Install on straight and solid surface

c) Do not apply a paint finish on top of anti-slip surface

d) Do not install over a floor covering like capte / PVC / Linoleum

Cleaning & Maintenance

1. All tread should be swept with a broom or vacuumed with a heavy-duty commercial vacuum cleaner, at least once a week.

2. External Treads should be periodically scrubbed with a stiff bristled brush using any commercial all purpose

    cleaner and thoroughly rinsed with clean water after cleaning.

3. Minor traffic marks on aluminum can be cleared by using fine steel wool and commercial cleaning agent.

4. Oil and Grease from the stair treads can be removed by using soap and brush. Rinse with clean water after cleaning.

5. For removing snow and ice from external treads, use sodium chloride salt.

6. To remove chewing gum from all types of stair treads, use putty knife, wire brush, clean cloth, commercial

    cleaning liquid, sponge & clean water. First scrape off as much chewing gum as possible with putty knife,

    soak it with commercial cleaning liquid for stubborn chewing gums. Repeat the process several times until

    desired result is achieved. Scrub with wire brush and clean the tread using soap and water, finally sponge

    the tread and remove extra water from the tread.

Packaging steps:

 (1) EPE → (2) Carton → (3) Plywood box  (or as your request) 

      All the cargoes will be inspected before delivery

Sample Time:   5-7 working days

Delivery Time: 15-20  working days depends on quantity

                            FCL/ LCL, our sales team is able to arrange the shippment for you

Trade Term: FOB/ EXW/ CFR/ CIF or as your request

Payment Term: L/C, T/T, Western Union, Money Gram and others,(Normally 30%TT deposit, 70% before delivery)

Overview  

Factory addr.: No.50, Dingjie, Pancheng, Pukou district, Nanjing, China

Office Addr.: No.608, Huaqian square, Pukou district, Nanjing, China

Nanjing MEISHUO Building Materials Co., Ltd was founded in 2000 and have more than 15years' experience in designing, manufacturing and installation of building Expansion Joint Systems(floor,wall and ceiling, roof), Movement Joint, Aluminum Entrance Mat, Stair Nosing, Aluminum Skirting Board, Landscape Grids, and so on.  

Our total engineered solutions approach provides integrated system design, consultation and installation support to architects, engineers, and contractors. All our products meet international standards of design, quality and performance.

Certification

Quality Control

Why choice us:

1. We're the earliest carborundum stair nosing manufacturer in china, and have more than 15 years experience of manufacture, install, and develop stair nosing.

3. Have been participating in many large exhibitions, like the BIG 5 in Dubai(2010), Canton Fair in Guangzhou(2012), etc.

2. Have approved ISO9001, and SGS certifications

4. Offer OEM/ ODM service

5. Provide 5 years quality warranty.

6. Recently, We defeated CS company and win the big order in Pakistan

FAQ:

1. You are a trading company or manufacturer?

    We are manufacturer, and have our own factory.

    Our factory address is: No.50, Dingjie, Pancheng, Pukou district, Nanjing, China 

2. What is your MOQ?

    10m.

3. What is your sample policy?

    We offer free samples, and the buyer takes responsibility of the express charge. 

4. How long is your production warranty?

    We provide 5 years warranty.

5. What's your trade term?

T/T, L/C, CFR, CIF, EXW, or as your request.

Lucia Liu

Sales Specialist

Nanjing Meishuo building material Co. ltd.,

Tel: 86-025-58196288    Fax: 86-025-58196399

Email: sales06(at)msbxf.com

Skype: lucia910811

Mobile: 86-15651809946

Any questions or problems, pls feel free to contact us!

Free samples for you!