Boiler Feed Pump | Global Trade leader ecrobot

Product

Boiler Feed Pump

Posting date : Aug 24, 2016

Click enlarge Image

Membership

Free Member Scince Mar 13, 2015

FOB Price

300

Min. Order Quantity

Supply Abillity

800

Port

Payment Terms

TT,L/C

Package

Standard export wooden case

Keyword :

Boiler Feed Pump

Category

MACHINERY & ELECTRICAL | Nuclear re | Pumps for | Pumps for

Contact

sherry lee

0 likes

Product Detail

Company Info

Quick Detail

Place of Origin

China [CN]

Brand Name

anpump

Model Number

013

HS-CODE

8413-11

Package & Delivery Lead Time

Package

Standard export wooden case

Delivery Lead Time

7-10 days

Detailed Description

General

Model QD (G) pump is a horizontal multi-stage centrifugal pump and suitable for transporting pure water (with the contained foreign matters' content less than l % and graininess less than 0. 1mm) and other liquids of both physical and chemical natures similar to those of pure water.QD (G) model middle and low pressure boiler water supply pump is applicable to transport medium with temperature of not higher than 120℃, and is also applicable for small boiler water supply or transporting medium similar to hotwater.QDG model hypo-high-pressure boiler water supply pump is applicable to transport medium with temperature of not higher than 180℃, and is also applicable for small boiler water supply or transporting medium similar to hot water. Performance range of mode QD (G) series Flow: 3-500m3/h Corollary power: 75-3400kW Head: 390-684m Inlet diameter: 25-450mm

Structure

For this series horizontal multistage centrifugal pump, both ends of it are supported, the casing portion is in a sectional form. it is connected to and actuated by a motor via a resilient clutch and the rotating direction of it. viewing from the actuating end. is clockwise. Refer to Fig. I for the structure of it.

Stator portionConsists of suck-in section. middle-section, spitting section, guide vane, packing etc., which are linked together with a take-up bolt. with both suck-in and spitting mouths vertically upward.

Rotor portionConsists of a shaft, impeller, balancing disk, muff etc. Parts.

Bearing portionThe whole rotor is supported by the roller bearings orsliding bearings on both ends of the shaft and the bearings are lubricated with grease or 20# engin oil.

Cooling and seal of pumpThe joint-part between suction section, intermediatesection and discharge section with be coated with molybdenum disulfide lubricating grease as seal. Rotor and fixed parts will be sealed by seal ring, guide-vane jacket and packing. The packing tensile degree of shaft seal should be proper and seep should be feasible dip by dip Unload run should be forbid. The seal ring and guide vane jacket should be replaced if they are too worn to be used any more and even do harm to pump work. There is spare shaft sleeve near shaft seal to protect shaft of pump.

Performance

QD(G) Series multistage pump dataPump Type Flow Head Power (m3/h) (m) (KW)QM(G) 6-25 3-7.5 73.5-306 4-11QM(G) 12-25 7.5-15 69-338.4 5.5-22QM(G) 12-50 7.5-15 139.5-648 18.5-75QM(G) 25-30 15-30 82.5-340 15-45QM(G) 25-50 15-30 15.78-618 22-110QM(G) 46-30 30-55 81-340 22-75QM(G) 46-50 30-55 138-666 37-132QM(G) 85-45 55-100 78-459 37-160QM(G) 85-67 55-100 183-666 90-250QM(G) 155-67 100-185 177-684 132-400QM(G) 280-43 185-335 114-423 160-450QM(G)280-65 185-355 372-680 500-800QM(G)450-60 335-684 171-650 360-3400