Superfine Slag Powder Production Line

Application of Superfine Slag Powder Production Line:

Superfine Slag Powder Production Line is the equipment specializing in producing fine and superfine powder of non-inflammable, non-explosive and brittle materials with Moh's hardness under six, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite and vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, rockphosphate, Kalium ore, pumice, etc., totally more than 100 kinds of materials.

Operating principle:

The electric motor drive the grinding disc device rotate through the reducer, the material move to the edge of the grinding disc under centrifugal force, rolled by the roller and crushed when go through the ring groove on the grinding disc. The crushed material go up by the jet stream on the edge of grinding disc, the bulky grain fall on the grinding disc directly. When the material in the jet stream through upper separator the coarse powder fall on the grinding disc from the cone re grinding under the action of rotating rotor, the qualified fine powder come out along with the airflow, the dust arrester installation collect it then be the product. It can be different granularity by adjust the separator.

Equipment of  Superfine Slag Powder Production Line:

Superfine Slag Powder Production Line mainly consist of main unit, classifier, powder collector, dust cleaner, blower, muffler, sound-proof room, crusher, bucket elevator, storage hopper, and vibrating feeder.

Features of Superfine Slag Powder Production Line:

♦ High Efficiency

Under the same finished final size and the same motor power, the capacity of Superfine Slag Powder Production Line is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.

♦ Long lifecycle of spare parts

The ring and roller are forged by special material with high utilization,the lifetime can reach 2-5 years for grinding calcite carbonate.

♦ High safety and reliability

As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.

♦ High fineness, flexible adjustment

The final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97≤5μm.

♦ Environment-friendly

The application of pulse bag filter and muffler greatly alleviates dust pollution and noise.

♦ Advanced intelligent speed control device

♦Convenient adjusting, more uniform particle size.