SDH MSPP STM-1 fiber optic equipment:SDH-LMFIT

Selling Leads Detail

Company Info

 

SDH MSPP STM-1 fiber optic equipment:SDH-LMFIT FastFOM Telecom cenny.xu@hotmail.com Description SDH/MSPP Multiplexer Introduce Overview As a key member of FastFOM "MetroEdge-Express"SDH/MSPP Product family, SDH-LMFIT is a carrier-class, cost-effective, compact (only 1U high) SDH/MSPP platform that is designed for applications in metro and access networks to facilitate the efficient transport of traditional TDM and emerging data traffic for service providers. SDH-LMFIT is a modularized unit with 4 universal slots, supporting different interface cards, such as STM-1 fiber optic cards, E1 cards, Ethernet cards (EoS VCAT), and V.35 card. The main board cross-connect capacity is 504*504 VC-12s (8*8 VC-4s), allowing non-blocking adding/dropping services among different interfaces. It supports the hybrid transmission of SDH, PDH, Ethernet and N*64K V.35 services within the same equipment. With the large capacity cross-connect matrix, the SDH-LMFIT can be configured as ADM, TM, and REG. It is suitable for multiple network topologies such as point-to-point, chain, ring, hub, and mesh networks. Features 1.4 General Slots, supporting a range of interface cards, including SDH, PDH, Ethernet and V.35 cards. 2.Ethernet service supporting GFP encapsulation, VC12 virtual concatenation (1~63 VC12) 3.Large cross-connect matrix capacity is 504*504 VC-12s (8*8 VC-4s) and powerful networking ability 4.LCD display for system configuration and alarm 5.Inter-working with popular SDH/MSPP products of various vendors 6.Suitable for 3G access network transmission 7.Easy commissioning and maintenance 8.High integration, compact design 9.High reliability, low CAPEX and OPEX Technical Specification Index Performance Parameter 1.SDH Interface Max 8 STM-1 optical interfaces(Four F155-DO cards used) Connector:SC/PC Spec:S-1.1, L-1.1, L-1.2 Single fiber bi-directional interface can be optionally supported 2.Service Card(4 General Slots) F155-O:Single STM-1 optical interface card F155-DO:Dual STM-1 optical interfaces card F4XE1:4*E1 interface card (75W) F8XE1:8*E1 interface card (75W or 120W) FFE201:2*FE interface card (2 FEs over a single virtual concatenation channel) FFE404:4*FE interface card (4 FE interface over 4 independent virtual concatenation channels) F2XV35:2*V.35 framed interface card (N*64k) 3.PDH interface E1 Spec:Comply with G.703, 2.048Mbps, HDB3 Max E1:24E1 (three F8XE1 cards support) 4.Ethernet Interface:10/100Base-Tx, Comply with IEEE 802.3 Max FE Interface:12 FE (three FFE404 cards support) Encapsulation Comply with ITU-T G.7041 (GFP) 5.V.35 Max Interface:6 V.35 interfaces (n*64K)DCE/DTE 6.Cross-connect Capacity Low order VC12:504*504 VC12 7.Management Protocol:SNMP or Q3 Interface 10Base-T and RS232 RS485 EOW interface Standard socket RJ11 LCD Display Supported Physical Dimension 1U: 440 * 44 *230 (mm) Power Supply:-48V DC or 220V AC or dual power supply+24VDC Consumption Consumption:<15 w Environment Temperature:5oC-45oC Humidity:<90% Weight:<3.5kg

Basic Company Information

FastFOM Telecom Equipments Co.,Ltd

Company Advantage

Detail Company Introduction