There are four charging modes for electric vehicles. In charging mode 4, one end of the cable is connected to the DC charging pile, and the other end is connected to the car charging port. The DC charging pile directly charges the car battery. This charging mode is faster, usually a car It only takes half an hour to fully charge the car. However, due to the need to transmit larger currents, the requirements for cables are higher.
The TUV certified cable produced by OMG, a well-known EV cable manufacturer in China, can carry a maximum current of 1000V and is suitable for cable selection in charging mode 4.
Reference Standard: IEC62893-4-1:2020
Conductor Material: Bare Copper
Insulation Material: TPE
Color: Brown, Blue, Yellow/Green
Filler Material:PP Cord
Tape Material: Non-woven fabrics
Sheath Material: TPE
Flame Test: VW-1 Test method Comply with UL 2556
Dielectric Voltage: 2.5kVac/15min.No Breakdown
Low temperature impact:-40℃No cracks
Hot Shock: 150℃/1h No cracks
Oil Resistance:IRM902,IRM903,Gasoline 20h OD Variation≤15% No Cracks
Vehicle driver over:5kN8Km/h,220KPa, No Breakdown
Resistance to Acid and alkali:168h,Tensile Strength Variation ≤30%;Elongation≥100%
Environmental Requirements:Compliant with RoHS and REACH
If you want to recharge your car quickly or choose a DC charging pile for charging, try the OMG Europe DC cable, which is suitable for the CCS 2 charging system.
About OMG : https://www.omgevcable.com/