Drilling Mud decanter centrifuge adopts centrifugal force to separate solid particles out of drilling fluid. Different solid or particle have different density and flow speed, drilling mud decanter centrifuge also can separate particles as different size and density. Drilling mud decanter centrifuge is widely used in oil and gas drilling, chemical, foodstuff, pharmacy, mineral beneficiation, water treatment, etc. industries.The feed enters the bowl through a stationary inlet tube and is accelerated smoothly by an inlet rotor. The resulting drilling mud decanter centrifuge forces make the solids collect on the wall of the bowl. The conveyorand the bowl rotate in the same direction, but at different speeds, which has the effect of moving the solids towards the conical end of the bowl for removal.
Decanting Centrifuge Technical Parameters
Model |
TRLWF450x842N |
TRLWF450x1000N |
TRGLW700x1200 |
TRGLW355x1250N |
TRGLW355x1250 |
TRGLW600x1500 |
Bowl Diameter |
450mm(17.7inch) |
450mm(17.7inch) |
700mm(27.5inch) |
355mm(13.9inch) |
355mm(13.9inch) |
600mm(23.6inch) |
Bowl Length |
842mm(33.1inch) |
1000mm(39.3inch) |
1200mm(47.2inch) |
1250mm(49.2inch) |
1250mm(49.2inch) |
1500mm(59inch) |
Max Capacity | 40m 3 /h | 60m3 /h | 90m3 /h | 40m3 /h | 60m3 /h | 90m3 /h |
Rotary Speed | 1800r/min | 1800r/min | 1300-1800r/min | 3200r/min | 0~3200r/min | 2600r/min |
G-Force | 815 | 815 | 1268 | 2035 | 2035 | 2268 |
Feed pump | 5.5kw | 7.5kw | 11kw | 7.5kw | 7.5kw | 11kw |
Separation point | 5~7m | 5~7m | 5~7m | 2~5m | 2~5m | 2~5m |
Main Drive | 22kw-4p | 30kw-4p | 55kw-4p | 30kw-4p | 37kw-4p | 55kw-4p |
Back Drive | 5.5kw-4p | 7.5kw-4p | 15kw-4p | 7.5kw-4p | 7.5kw-4p | 15kw-4p |
Weight | 2550kg | 2700kg | 4300kg | 2950kg | 3000kg | 4000kg |
Dimension |
2360x1850x1750mm |
2600x1860x1750mm |
3250x1800x2180mm |
2900x1850x1750mm |
2900x1950x1750mm |
3200x1700x1800mm |
(Note: Rotary speed can be adjustable as per user's requirements)
Features and Advantages of TR Decanter Centrifuge:
New Materials Application:2205 duplex stainless steel is used in the production of the main body for TR Series decanter centrifuges,this kind material will be better than 316L on the resistant to corrosion.In addition,the protection cover for main body and gear box are all the material of stainless steel.