Advanced Good Performance Ring Die Pellet Machine

The pellets made by different ring die pellet mills are of different sizes, mainly because of difference of the material compress ratio. Actually, it's easy to make the biomass pellets. Before put the materials into the feeder, we should crush the large blocks into small ones to meet the size of die. When small particle size materials are feed into the pellet mill, two rollers will press the material into the 6mm or 8mm stainless steel ring die to form a solid pellet. The processing is not so difficult to operate if you understand the structure. We design the taper and thickness to create press for the lignin to reach sufficient temperature and bind the material together.

Advanced good performance ring die pellet machine has large diameter ring dies inside, when pellet machine works, the temperature can make cereal materials fully cured, which will help animal easily digestion, at the same time the spare parts friction reduce to the bottom. Advanced good performance ring die pellet machine has forced material-entrance equipment and overload feeding protection device, which makes machine more safe to work. Also it has changeable speed feeder and conditioner, the feeder can adjust feeding materials speed. Conditioner will connect with steam boiler or water to soften materials. If use steam, pellet surface will become more smooth and increase capacity.

Advanced good performance ring die pellet machine is identifiable by the circular 'ring' shape of their extrusion die. Generally small wheels in the center of the ring ride on the die and force the raw material through the extrusion holes. They are capable of very large amounts of production and they don't wear out as quickly as flat plate mills. They are quite a bit heavier than flat plate mills. They are usually more expensive and are prefered by commercial pellet mills.

Driven with heavy- duty gearbox construction can produce continuously in most adverse condition. The imported key elements are of high performance with long life and low maintenance cost. The key parts are made of alloy steel to be very strong and malleable. Die is made of stainless steel. Ring die pellet mill is widely used in the granulation of wood, straw, other biomass sources. capacity ranges from 200kgs to 3T per hour.

Advanced good performance ring die pelletmachine is mainly consist of feeding device (screw feeder), hardening and tempering device (conditioner), face plate, press chamber transmission system, overload protection and electrical control system. The feeding of ring die type feed mill is forced into the pelleting chamber and distributed by the high speed rotary scrapers. It is featured with movable, reasonable price and high output. The output capability ranges from 0.8 to 2 t/h.

Contact Infomation

Email: info@sinoftm.com

Website: http://www.paradisedivingasia.com/equipment/ring-die-pellet-mill.html

Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China