RC522,RC523 Surface Mount Package design HF RFID Reader/Writer Module JMY620

Selling leads

Posting date : Jun 03, 2014

Click enlarge Image

Membership

Free Member Scince Mar 11, 2014

FOB Price

$27.87 FOB

Payment Terms

T/T L/C

Package

box/CTN

Keyword :

Category

MACHINERY & ELECTRICAL | Electrical machi

Contact

Selling Leads Detail

Company Info

Quick Detail

Place of Origin

China [CN]

HS-CODE

85-

Package & Delivery Lead Time

Package

box/CTN

Delivery Lead Time

Detailed Description

JMY620 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. And the module and antenna is linked by 50ohm coaxial line. The impedance between RF module and antenna was tuned by impedance analyzer; so the module has excellent read/write performance and stability. Though the wire can reach 10m, but the performance is good. Normally the wire should be 60cm that is the module's best performance and stability. JMY620 adopts surface mount installation form. Small size is a major feature of JMY620. JMY620 has many kinds of funtions and it can support various contactless IC card under international standards. Meanwhile it can support the cards from different suppliers. Designer classified&integrated the operation commands for contactless IC cards. In this situation, the uesr can operate it easily via sending simple commands. The most important features for JMY620 is that it can support contactless IC cards(T=CL) fully. It can send and receive more than 256 Bytes APDU commands and also support FSDI=8. Qualifications: PCD: NXP MF RC522, NXP MF RC523 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B Operating distance: 100mm(depending on card and antenna design) Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF; Can be set Interface: IIC, UART(selected by SPS pin, recommend to use IIC) Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: DC 3.3V + 5V(

Selling Leads Detail

Company Info

Basic Company Information

Jinmuyu Electronics Co., Ltd

TEL : 86-10-69559637 / FAX : 86-10-80883677
Room 132, Building 16, Tian Qiao Wan, XinHua North BEIJING TongZhou District China [CN]

Company Advantage

Detail Company Introduction

Jinmuyu is one of the leading 13.56MHz RFID reader manufacturers. We build, design and customize products to satisfy a range of customers. Our production facilities are certified under ISO/IEC10373-6, EMV2000, EMV2010 and PBOC 2.0 which are recognized all over the world. Our products support ISO/IEC14443A, 14443B, 15693 and ISO7816(T=0, 1) protocols and also support MIFARE 1K, MIFARE 4K, FM11RF08, Ultralight, Ultralight C, MIFARE Mini, DESFire, MIFARE Plus; CPU cards(Type A/B, dual-Interface, T=CL); SR176, SRI512, SRI1K, SRI2K, SRI4K, SRIX4K, AT88RF020; NXP I.CODE SLI, TI Tag_it HF-I, ST LRI and so on.

The products contain JMY620 series which are the surface mounted design, can send and receive more than 256 Bytes APDU commands and also support FSDI=8; lower power consumption like JMY504; JMY601 (Integration antenna design); JMY501 (connection outside antenna via four lines); JMY505 (connection outside antenna via 50ohm coaxial cable); JMY680 (applies to some metallic-around systems); MR800 (with LCD display); MR600 (inlay LED Nixie tube which with 8 bits LED display); the ID reader MR761 series which can support positive sequence, reverse output in hexadecimal or decimal UID, and can read the data in the card via configuration. Many of the above products contain one or more than one SAM card slots.

At the same time, the interfaces for the reader we can offer IIC, UART, RS232C, RS485, USB (HID or PC/SC standard), Ethernet RJ45 (TCP/IP), Bluetooth and so on; and the PCD contain NXP RC500, RC531, RC632, RC400, RC522, PN512, RC523, FM1702, FM1712, FM1722; Meanwhile in order to meet the different needs of different users, we use MCU 8051, ARM7, ARM9 and ARM11 to develop the module or reader. It is worth mentioning that we also provide ODM / OEM customized products and services. Welcome to contact us, and we will provide you with the high quality products and the excellent services.