Gasoline additives for car use

Selling Leads Detail

Company Info

 

Introduction of methanol gasoline: 1. Methanol gasoline is a newly developed fuel oil for car use. It is composed by methanol, gasoline and relevant additives. 2. This kind of fuel has high octane value when compared with same grade gasoline. Thus the power would be much higher, and the consumption would be lower. At the same time, since methanol has high cleanliness, this kind of gasoline would clean the fuel system and reduce discharge of harmful emission. 3. And also methanol gasoline could be used easily without any adjustment on the engine of cars. What is more, it could be stored for more than 3 months if the water included does not exceed the relevant standard under ambient temperature. Definition of our gasoline additives: Our additives is the auxiliary agents for mixing methanol with gasoline equably. It is quite essential during the process of making methanol gasoline. And with it, you could improve the octane value, calorific value and power of fuel easily. Feature of our gasoline additives: 1. Unique solubilization technology to enhance stability of finished product: It can make methanol and gasoline mixed organically and equably without any layer and emulsification, which is soluble with national standard gasoline and ethanol gasoline infinitely. 2. Super water resistance: It can resist moisture in the air during transportation, storage and filling up. 3. Good anticorrosion performance: Through strong interactions between alkaline group in corrosion inhibitor molecules and metal surface, it can make chemical and physical adsorption to occur to form a good protective film which can insulate the contact between methanol and metal parts to some extent, so that it can reach the corrosion reduction or inhibition aims. 4. Super adaptability of temperature environment: It can be normally produced or used under temperature from 40 Celsius degrees to 40 Celsius degrees. It resists phase separation under low temperature, and also easy to start under low temperature and no air lock under high temperature. 5. Special technology of heat value improvement: It increases heat value by using denatured methanol, and at the same time, promotes the overall improvement of burning rate and thermal efficiency because of one of methanol features like high vaporization latent heat which enable it to have the same combustion effect as national standard gasoline does. It means power enhancement and fuel consumption reduction. Technical data of gasoline additives: Appearance faint yellow transparent liquid without deposits or suspended substance Actual colloid substance no more than 5 mg per 100 ml Density 0.780-0.825 g per cubic centimeter (20 Celsius degrees) Copper strip corrosion no more than 1 (50 Celsius degrees,3 hours) Moisture no more than 0.2% (Volume Fraction) Mechanical impurities no more than 0.01% Application of gasoline additives: 1. You could mix gasoline with denatured methanol(methanol with relevant additives) at any proportion, such as 90% gasoline vs 10% denatured methanol. 2. Pls first mix additive with methanol first and then mix the denatured methanol with standard gasoline.

Basic Company Information

Nanyang Jinghong New Energy Technology Development

Company Advantage

Detail Company Introduction