Belt Tension Tester

Selling Leads Detail

Company Info

 

Model: BTT-2880 Application: The measuring head is placed on the belt and the clamp is tightened using the clamping knob. This deflects the belt through a known angle defined by the anvil and the fixed pillars. A load cell attached to the clamp measures the force required to deflect the belt. which is proportional to the tension in the belt. The output voltage from the load cell is digitized and scaled to give the correct tension reading on the instruments display. Operation: Display: 4 digits, 10 mm LCD with colored coded LED indication of Low , Ok and Hi. Measurement range: 0-750 Newtons 0-120 Pounds 0-77 Kilograms 0-114 Seems Belt width: Up to 36mm Overload alarm: 750 Newtons Maximum load: 850 Newtons Resolution: +-1 Newtons or 1 least signinficant digit of other units Accurancy: +-5% of full-scale PC interface: RS232C interface Audible warning: Piezoelectric sounder Power supply: 4*1.5V AAA size batteries Dimensions: 135*62*33mm or 5.3*2.4*1.3inch Weight : 335g( not including batteries) Standard accessories included: Measuring head............1 pc Carrying case.................1pc Operation manual...........1pcs Optional accessory: Cable and software for RS232C and USB

Basic Company Information

Guangzhou Landtek Instruments Co.,Ltd

Company Advantage

Detail Company Introduction