Wear-resistant steel bars
1.Model:φ40-120mm, Length 2-6m
2. Scope:Widely used in coal slurry, quartz sand, silica sand, bauxite and other metals, non-metallic mineral processing indus…
DRILL PIPE PRODUCTION LINE:
The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency …
Solid Carbide Rods (Full Length)
The Tungsten Carbide Rods, Blanks are made by Extrusion from the highest purity of Materials and Sinter Hiped.
Be of very high quality and tool perof…
Rods with 1 Central Hole
The Tungsten Carbide Blanks are made by Extrusion from the highest purity of Materials and Sinter Hiped.
Be of very high quality and tool peroformances, the …
Rods with 2 Parallel Holes
The Tungsten Carbide Rods, Blanks are made by Extrusion from the highest purity of Materials and Sinter Hiped.
Be of very high quality and tool peroformances, the gr…
Rods with 2 Helical Holes, 30º
The Tungsten Carbide Rods, Blanks are made by Extrusion from the highest purity of Materials and Sinter Hiped.
Be of very high quality and tool perofor…
Rods with 2 Helical Holes, 40º
The Tungsten Carbide Rods, Blanks are made by Extrusion from the highest purity of Materials and Sinter Hiped.
Be of very high quality and tool perofor…
Cut-to-Length Carbide Rods (Metric)
The Tungsten Carbide Rod, Blanks are made by Extrusion from the highest purity of Materials and Sinter Hiped.
Be of very high quality and tool per…
Cut-to-Length Carbide Rods (Inch)
The Tungsten Carbide Rods, Blanks are made by Extrusion from the highest purity of Materials and Sinter Hiped.
Be of very high quality and tool pero…
Carbide Rods for PCB Tools
We have bene the leading manufactuer of the Carbide Rods/Blanks for PCB Tools in China for both domenstic and overseas market. After years of Researching and…
Engine Model : Mitsubishi 4G63
C/C length : 150.01mm
Big end bore : 48.006mm
Big end width : 26.37mm
Small end bore : 22.015mm
Small end width : 22.86mm
Material : forged 4340 stee…
Engine Model : Honda F20C
C/C length : 152.98mm
Big end bore : 55.003mm
Big end width : 23.85mm
Small end bore : 23.015mm
Small end width : 22.86mm
Material : forged 4340 steel…
ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea