DJI Spreading Wings S1000+ Octocopter with Zenmuse Z15-A7, A2, Transmitter Batteries, and Case Kit

Product Highlights

• Z15 3-Axis Gimbal for Sony a7S / a7R• DJI A2 Flight Control System• Futaba 14SGH 14-Channel Transmitter• Collapsible Frame and Folding Props• Up to 24 Pound Take-Off Weight• Low Gimbal Mounting with Dampening• Retractable Landing Gear• One-Motor Failure Survivability• Two 13,000mAh Flight Batteries• Watertight Hard Case

• DJI Spreading Wings S1000+ Professional Octocopter

  Performance
  Takeoff Weight	13.2 lb / 6 kg to 24.2 lb / 11 kg

  Motor
  Stator Size	1.6 x 0.6" / 41 x 14 mm
  Motor Velocity Constant	KV: 400 rpm/V
  Maximum Power	500 W
  Weight	With Cooling Fan: 5.6 oz / 158 g

  Electronic Speed Control (ESC)
  Working Current	40 A
  Working Voltage	6S LiPo
  Signal Frequency	30 to 450 Hz
  Drive PWM Frequency	8 kHz
  Weight	1.2 oz / 35 g

  Propellers
  Size	15 x 5" / 38.1 x 12.7 cm
  Weight	0.5 oz / 13 g

  Frame
  Diagonal Wheelbase	41.1" / 1045 mm
  Frame Arm Length	15.2" / 386 mm
  Center Frame Diameter	13.3" / 337 mm
  Center Frame Weight	With Landing Gear Mounting Base, Servos: 3.3 lb / 1.5 kg
  Landing Gear Size	18.1 x 20.1 x 12" / 460 x 511 x 305 mm

  Flight Control System
  Compatibility	A2 or WooKong-M
  Gain Value Settings	For A2 Flight ControllerBasic: Roll 120%, Pitch 120%, Yaw 120%Attitude: Roll 170%, Pitch 170%, Vertical 120%For WooKong-M Flight ControllerBasic: Roll 130%, Pitch 130%, Yaw 120%Attitude: Roll 180%, Pitch 180%, Vertical 120%

  General
  Power Requirements	Lithium-Polymer (LiPo):
  Power Consumption	Maximum: 4000 WHovering: 1500 W at 20.9 lb / 9.5 kg takeoff weight
  Operating Temperature	14 to 104°F / -10 to 40°C
  Weight	9.7 lb / 4.4 kg

  Packaging Info
  Box Dimensions (LxWxH)	20.1 x 17.8 x 11.6"

• DJI A2 Flight Control System for Multi-Rotor Aircraft

  Supported ESC Output	400 Hz refresh frequency
  Supported Transmitters	With Built-in Receiver: Futaba FASST series and DJI DESST series
  Supported External Receivers	Futaba S-Bus, S-Bus2, DSM2
  Other DJI Products Supported	Z15, H3-2D, iOSD, 2.4G Bluetooth Data Link, and S800 EVO
  Hovering Accuracy (GPS Mode)	Vertical: ±1.6' / 0.5 mHorizontal: ±4.9' / 1.5 m
  Maximum Wind Resistance	< 26.2 fps (8 m/s) / 17.9 mph (28.8 km/h)
  Maximum Yaw Angular Velocity	150 deg/s
  Maximum Tilt Angle	35°
  Ascent/Descent	±19.7 fps / 6 m/s
  Power Requirements	Maximum: 5 WTypical: 0.3 A at 12.5 V
  System Requirements	Assistant Software: Windows 8, 7, or XP SP3 -- 32 or 64-bit
  Operating Temperature	23 to 140°F / -5 to 60°C
  Dimensions	Flight Controller: 2.1 x 1.5 x 0.6" / 54 x 39 x 14.9 mmIMU: 1.6 x 1.2 x 1" / 41.3 x 30.5 x 26.3 mmGPS-Compass Pro: 2.4" (diameter) x 0.6" / 62 mm (diameter) x 14.3 mmLED-BTU-I: 1.2 x 1.2 x 0.3" / 30 x 30 x 7.9 mmPMU: 39.5mm x 27.6mm x 9.8mm
  Weight	Overall: 7.9 oz / 224 g

  Packaging Info
  Box Dimensions (LxWxH)	6.9 x 4.7 x 2.7"

• DJI Zenmuse Z15-A7 3-Axis Gimbal for Sony a7S / a7R

  Peripheral
  Supported Camera	Sony a7S / a7R
  Supported Lens	Sony FE 35mm f/2.8 ZA
  Control Requirements	At least 4 spare receiver channelsS-Bus/PPM receiver supported
  Software Requirements	For Assistant Software: Windows 8, 7, XP SP3 -- 32 or 64-bit

  Electrical Characteristics
  Working Current	Static Current: 200 mA at 25 VDynamic Current: 400 mA at 25 VLocked-Rotor Current: 4 A at 25 V
  GCU BEC Output	10 A at 12 V
  Transmit Power	GCU Wireless Video Transmission: 1 A at 12 V

  Performance
  Load Weight (Reference Value)	1.4 lb / (622 g) with Sony a7S, FE 35mm f/2.8 ZA lens, battery, lens hood, and SD Card1.3 lb (580 g) with Sony a7SR, FE 35 mm f2.8 ZA lens, battery, lens hood, and SD Card
  Controlled Angle Accuracy	±0.01°
  Maximum Controlled Rotation Speed	Pan Axis: ±130°/sTilt Axis: ±130°/sRoll Axis ±30°/s
  Controlled Rotation Range	Pan Axis Control: ±360° continuous rotationTilt Axis Control: +50°:/-140°Roll Axis Control: ±40°

  General
  Power Requirements	GCU: 4S to 12 S LiPo (6S if using S800, S1000+)
  Operating Temperature	14 to 122°F (-10 to 50°C)
  Dimensions	Gimbal: 8.7 x 8.7 x 7.5" (220 x 220 x 190 mm)Camera Frame Dimensions: 5.6 x 3" (142 x 76 mm)GCU: 2.5 x 1.4 x 0.8" (64.2 x 34.1 x 19.5 mm)
  Weight	Gimbal: 2.9 lb (1.3 kg)GCU: 2.2 oz (63 g)

  Packaging Info
  Box Dimensions (LxWxH)	10.0 x 9.449 x 9.37"

• 2 x Venom Group 13,000mAh Professional DRONE LiPo Battery with XT150 & AS150 Connectors (22.2V)

  Battery Information
  Application/Usage	Drone
  Battery Rechargeable	Yes
  Battery Size	Proprietary Battery Size
  Battery Chemistry	Lithium Polymer (Li-Polymer)
  Battery Capacity	13000 mAh
  Output Voltage	22.2 V DC