No.
|
ITEM
|
PARAMETER
|
REMARK
|
|
1
|
MATERIAL
|
Type
|
Cold-rolled strip steel, galvanized sheet
|
|
T.(mm)
|
3.0-4.5mm
|
|
||
Yield Strength (Mpa)
|
Q250-300
|
|
||
2
|
Forming product Width
|
98mm
|
|
|
3
|
Forming speed (m/min)
|
8-12m
|
Including hole
|
|
4
|
Forming main power (KW)
|
18.5KW
|
FYR
|
|
5
|
Hydraulic power (KW)
|
18 KW
|
FYR
|
|
6
|
Voltage
|
AC380V,50Hz,3P
|
|
6.1 Forming Roller:19 stations,and add Rub-roll, To make sure the surface profile no scratches.
6.2 Gateway Panel:T.50mm steel, Heavy duty 。
6.4 Roller material:GCr15,overall quenching, hardness HRC56-62 ℃.
6.5 Motor power:18.5KW*2PCS。
6.6 Main Roller :¢95mm,45 #。
6.7 Equipment base: 45 # H type using welded steel plate.
6.8 Transmission: Gearbox drive.
6.9 Security: across the board with emergency stop buttons, easy to handle emergencies, to ensure that equipment and operator safety. And other gear in the chain and the staff could easily lead to injury transmission section covered with protective cover, to ensure the safety of workers.