Sandwich panel specification
|
Length: Min cutting length is 2 mMax cutting length is 15m: (see profile drawing)Thickness: (see profile drawing)
|
raw material specification
|
coil thickness: 0.4~0.6 mm (steel be flat without ups and downs,deformation and bending)sheet yield stress: ≤235MPacoil max : 1200 mm (tolerance±2mm)coil max weight: 4Tcoil ID: Φ500 and Φ600 mmcoil OD: Φ1000 mmEPS material: density is≥18㎏/m3,unstraight of each side ≤1㎜/m,,curve ≤3㎜/m,surface be even, ineveness smaller than 1.5mm/m, EPS material single piece length more than 3m.Material suitable shape: see profile drawingMaterial suitable : minimum shall be 1/2mm of the finished panel
|
Machine line specification
|
Work line speed : 1000-3000 mm/min (frequency speed adjustment).Attention: depend on glue brand, temperature and proficiency of operators.Machine length : about 40 mWorking : 1050 mm(panel output )Laminating effective length: 7.5 mControl way: adopt industrial computer PLCTotal power: about 35 kwPower: 380V/3phase/50 Hzcontrol voltage: 24 V/110 V/220 Vpneumatic: 0.7 Mpa (self prepared by factory) best working temperature:around 25℃ Layout drawing for EPS Sandwich Panel Line
|